|
Anionic polyacrylamide (APAM) specificatoin
|
||||||
|
Products model
|
molecular weight (10 thousand) |
Degree of hydrolysis %
|
solid content%
|
effective PH range
|
residual monomer content % |
dissolving time
|
|
7926M
|
2000-2500
|
10-15
|
≥88
|
3-10
|
≤0.05
|
≤50mins
|
|
7952M
|
1800-2500
|
25-35
|
≥88
|
3-10
|
≤0.05
|
≤50mins
|
|
7990M
|
1000-1500
|
40-45
|
≥88
|
3-10
|
≤0.05
|
≤50mins
|
|
7800
|
2500-3000
|
25-30
|
≥88
|
3-10
|
≤0.05
|
≤50mins
|
|
7950-20
|
1000-2000
|
20-25
|
≥88
|
3-10
|
≤0.05
|
≤50mins
|
|
7950-40
|
1500-2000
|
25-30
|
≥88
|
3-10
|
≤0.05
|
≤50mins
|
|
7990N
|
1000-1500
|
45-50
|
≥88
|
3-10
|
≤0.05
|
≤50mins
|
Oil-displacing agent of oil field tertiary oil recovery:
It can adjust the rheology of filled water, increase the viscosity of driving liquid, improve water drive wave and efficiency, lower water phase permeability in ground layer, and enable water and oil to flow forward at even speed. Its effect is that it is mainly used in tertiary oil recovery of oil fields in the aspect oil production, and raw oil of about 100 to 150ton more can be produced through filling the macromolecule polyacrylamide product one ton.
Well drilling mud raw materials:
Industrial Waste Water Treatment:
Water sources of many tap water factories in China come from rivers, the sand and mineral contents are higher, water is muddy, the water still can not achieve demands although passing through sedimentation and filtration, and flocculating agent needs adding; however huge adding amount generates increased mud amount and bad effect. The adding amount is only 1/50 of inorganic flocculating agent if anionic-polyacrylamide is adopted as flocculating agent, but the effect is several times better than the organic flocculating agent, and even dozens of times. If the river water with severe organic matter pollution can be matched with anionic-polyacrylamide for use, the effect will be better.

