This brand-new (FC) CNC WASP V4 BELT 250 helicopter which is equipped with 7-
channel transmitter,has been researched sucessfully.it's concepted to be a high performance,ease
of control,stable,durable,and lightweigh helicopter.It adopts CCPM control component
metal swashplate,metal tail rotor gear box set,belt driven system and professional gyro,which ensure
the helicopter react fast on any kind of 3D acrobatic flying courses and flight stability.furthermore,our
new SKYARTEC's CNC WASP V4 BELT 250 is equipped with high quality CNC alloy rotor
head/frame and matched with high performance 4500KV Brushless motor,Brushless ESC,and Li-po
Battery.
channel transmitter,has been researched sucessfully.it's concepted to be a high performance,ease
of control,stable,durable,and lightweigh helicopter.It adopts CCPM control component
metal swashplate,metal tail rotor gear box set,belt driven system and professional gyro,which ensure
the helicopter react fast on any kind of 3D acrobatic flying courses and flight stability.furthermore,our
new SKYARTEC's CNC WASP V4 BELT 250 is equipped with high quality CNC alloy rotor
head/frame and matched with high performance 4500KV Brushless motor,Brushless ESC,and Li-po
Battery.
Product included:
Wasp V4 Belt 250 CNC helicopter ;18A brushless speed controller;SKY 600 head locked gyro;
4pcs servos ;4500kv brushless motor;SKY706 2.4GHz 7ch TX; SKY706 2.4GHz 7CH RX;11.1V900mah LI-PO battery and balance charger;Color PVC canopy
4pcs servos ;4500kv brushless motor;SKY706 2.4GHz 7ch TX; SKY706 2.4GHz 7CH RX;11.1V900mah LI-PO battery and balance charger;Color PVC canopy
Feature:
Adopts CCPM control component , metal swashplate,tail rotor and Belt driven system, professional
gyro, which ensure the helicopter react fast on any kind of 3D acrobatic flying courses and fllight
stability.
gyro, which ensure the helicopter react fast on any kind of 3D acrobatic flying courses and fllight
stability.
7 Channel R/C Set included, complete Forward/Backward, Left/Right, Up/Down &Pitch Control
(RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set
(RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE) New radio control set
High Performace 4500KV Outrunner Brushless Motor used as the main drive and makes the flight
much stable and better performace
much stable and better performace
High quality CNC alloy rotor head dopts Light weight,Ultra tough Carbon Fiber side board.
Using alloy tail boom.
Can fly in skyway, backward, and 3D aerobatic
CCPM mixing control system and collective pitch structure
120 degree CCPM system provides precise movement if comparing with the traditional mechanical
mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced mproved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
mixing since there are less linkage/push-rod in the helicopter and weight is greatly reduced mproved blades give superior lift. Their pop off design gives extra protection in case of heavy landing
Bell-heller mixing greatly increase the sensitive of the whole helicopter, which provide good aerobatic
responds
responds
The autorotation landing system, made of high quality one-way bearing, maximally protects your
helicopter from damage
helicopter from damage
Hard, Light weight ABS Blades
Brand new design for the structure
Improved battery support that holds the battery firmly, and can also be adjusted to suit your balance
of flying
of flying
Tail rotor driven by belt provide stable flight and low noise.
NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder like Gas- Helicopter No need
to worry about burning tail motors
to worry about burning tail motors
Outer placed Head Lock Gyro
11.1V 900mAh high capacitance Li-Po battery provide enough power for any aerobatic flight
With length-adjustable servo push-rod, precision sub trim can be easily set Separate main shaft and
main gear reduce repair time and noise
main gear reduce repair time and noise
Weight is a key to a EP helicopter, lightened skid set, main gear, main frame and
canopy reduce the load of whole helicopter
canopy reduce the load of whole helicopter
Easy to fly and more stable lifting
Sky706 2.4G receiving and transmitting system increases the operation stability
With adjustable pitch system and 3D conversion
Provide excellent performance outdoor and indoor
Tail blade adopt flameout landing system
Newly Designed Rotor Head gives better control
Pre position servo mounts have been added in this helicopter, servos can be
mounted solidly by screw and easy to install
Extreme smooth control and stable flight
Precise controlling and hovering
Digital Proportional Motor Speed Control
Suitable for Indoor/Outdoor/Backyard/Stadium
Using the Ultra tough Carbon Fiber and Aluminum Alloy materials, the Helicopter
does have very strong structure. In addition, the main rotor blades are using top
quality ABS Blades , which is extremely light and not easily break
does have very strong structure. In addition, the main rotor blades are using top
quality ABS Blades , which is extremely light and not easily break
Specification:
Main Rotor Diameter : 470mm
Length : 460mm
Flying Weight : 330g
Driven system : Skyartec 4500KV brushless motor
Gyro : Sky600 Head Lock
Serv : 3X Skyartec 9g + 1X Skyartec 5g
ESC: Skyartec 18A
Battery : Skyartec 11.1V 900mAh Lithium Li-Po
Control system: SKY706 2.4GHz 7CH Transmitter and SKY706 2.4GHz 7CH Receiver