120w LED Canopy Light for Gas Station New Product Used in the Gas Station
Emit International Group Ltd. (Cree LED, Meanwell driver)
Special Feature :
A, High EMC,no interfere
B, Power factor>0.95
C, Power Efficiency>90%
Emit International Group Ltd. (Cree LED, Meanwell driver)
Special Feature :
1. Quality Waterproof Driver with 3-year warranty(Taiwan Meanwell driver)
A, High EMC,no interfere
B, Power factor>0.95
C, Power Efficiency>90%
D, UL, TUV, PSE compliance
E, Full protection: short circuit , over voltage , over current and over temprature
2. High-performance Original CREE LED( Made in USA ) and perfect wiring design
Even if one led failed, the remaining LEDs will still work.
3. Safety
A, CE, RoHS, PSE, FCC, C-TICK, ATEX, EN62471, IP66
B, ATEX approved (Explostion proof )
C, IP66 approved ( Water proof )
D, EN 62471 (Photobiological Safety)
D, 4000V Hi-pot test pass
4. Low Light Loss
The light source is the low light loss and high-bright LED, in which the loss is less than 5% for every 10,000 hours. The aluminum back-side housing performs an excellent heat dissipation, which guarantees a lower junction temperature of the LED, thus slowing down light loss.
5. Environment-Friendly
While working, no ultraviolet light and infrared light radiation. And does not contain any hazardous substance, such as Lead and Mercury.
6. Anti-vibration
Solid-state device. Can withstand Moderate vibrations
7. Warranty Policy
3 years warranty with 20,000 switch cycles (on/off switching).
8. Technical Specification:
| Item NO. | EMIT-CL-120W-1 | |
| Replacement | 250-300w Sodium/metal lamp | |
| LED Source | CREE LED, 107-122lm/W | |
| LED Initial Flux | 10000-11000Lm | |
| Lamp Power | 120W±10% | |
| Power Efficiency | 90% | |
| Lamp’s Efficiency | 90lm/w | |
| Luminous Flux | WW | 9000-10000Lm |
| CW | 10000-11000Lm | |
| Luminous Uniformity | ﹥0.6 | |
| Color Temperature | WW | 3000K±300 |
| CW | 5700K±500 | |
| Average CRI | WW | Ra﹥80 |
| CW | Ra﹥75 | |
| Bean Angle | 60 degree | |
| Light Distribution Curve (Beam Pattern) | Asymmetric(Bat Wing )/Rectangular Beam | |
| Input Voltage | 85-305V AC or 24V DC | |
| Frequency Range | 47-63Hz | |
| Power Factor (PF) | ﹥0.95 | |
| Total Harmonic Distribution(THD) | ﹤16% | |
| Storage Temperature | -40℃--+80℃ | |
| Working Environment | -40℃--+50℃:10%-95%RH | |
| Junction Temperature (Tj) | 60℃±10%(ta=25℃) | |
| Light Body and Lampshade Material | Aluminum Alloy and PC | |
| Working Lifetime | ﹥50000hrs | |
| IP Rating | IP 65 | |
| Weight | 5kg | |
| Product Size (mm) | 300×300×80 | |
| Package Size (mm) | 380×370×215(1PC) | |
1 All of the technical parameters is for the module, however the manufacturing process of LED is very complex, so the typical technical parameters above is for statistical data which doesn’t accord with the actual technical parameters for each product.
2)The approximation is for light color, the tolerance of wattage is 10%.
3 The current data can query from internet.
2)The approximation is for light color, the tolerance of wattage is 10%.
3 The current data can query from internet.