XG-100 four stations barrel inner and outer washing and filling machine (100 barrels/hr)
1.The technical parameters:
Device models: XG-100 type (100 barrels / hour)
Device Dimension: L2940 × W500 × H1510mm
the maximum packaging size: L3000 × W580 × H1700mm
sheet, pipe material: SUS304
The device power: 3580W
Voltage requirements: AC380/220V (can be customized according to requirements)
Air source requirements: displacement m3/min≥ 0.2
Working pressure (Mpa) ≥ 0.8Mp
Standard Bottle Size : 270 * 490 * 56mm (Depending on the design of the bottle)
Total weight:
2. The basic configuration of the equipment:
Electrical appliances: LG,omron control components , PLC control system.
A set of Taiwan Yadeke pneumatic element
A set of stainless iron heating tube
A approach switch of Germany tuerke
3 sets of lingxiao water pump
wooden packaging
3.features:
adopting world famous brand electrical control components, PLC control system has greatly increased the reliability of the equipment
equipment, pumps, valves, motors with CE certification, good quality more assurance
Using a pneumatic mechanism to finish transporting chain,pushing bottle and sealing cap, saving nature source and health
The sensor switch control, when the barrel touching ,the system start to work automatically, spraying water and filling
Owning automatic power-off protection,don't worry about the situation of leakage and short circuit.
Gas source under voltage protection, the device will automatically shut down when the inlet pressure small or equal to 0.3MPa;
finished water tank ( proving filling machine water source jug), low water protection, device will automatically shut down when the water tank water level is below the liquid level switch,
Filling the amount can be controlled by adjusting the filling time and filling valve
Washing the single-row four position: the first and second station rinsing bottle for 30 seconds by using thermal disinfectant.
The third station drip dry the inside barrel disinfectant
The fourth pure water rinsing for 15 seconds