Advantages:
1.made from 100% virgin raw material.
2.produced with advanced equipments and process.
3.Extreme hardness
4.Wear resistance
5.Corrosion resistance
6High temperature resistance
Application:
Making drills,endmills and reamers,also be used for cutting,punching and measuring tools
Spcecification:
Material:YG10X,YG8X,YG6X,YG10,YG8,YG6 etc.
Dimension:Diameter:4.5mm-25mm
Length:42mm-330mm
Diameter tolerance:0.006mm-0.3mm
Surface quality:Ra<0.05mm polished-ground
Any sepcifications,shapes and dimension can be supplied as per specific requirements of the customers by drawing or samples
Recommended Grade Performance and Application:
|
ISO Grade
|
Density g/cm3
|
Hardness HAR
|
Bend Strength N/mm2
|
Application
|
|
K05-K10
|
≥14.9
|
≥93.2
|
≥3800
|
Suitable for machining aluminum-magnesium alloys, glass fiber, carbon fiber,wood, harden plastic and iron-based alloys, etc. It is recommended for making PCB micro drills and drills of other materials
|
|
K10-K20
|
≥14.65
|
≥92.8
|
≥3800
|
Suitable for machining cast irons,aluminum alloys,meterial,etc, and also can be used for the machining of common steel. It is recommended for the drilling of cast iron,aluminium alloy.
|
|
K20-K30
|
≥14.45
|
≥92.0
|
≥4000
|
A good material for general-purpose, Suitable for making solid carbide tool for machining heat-resistant alloys and it can also be used for making microdrills for PCB.
It is recommended for making differenct specification tools, such as drills, end mills, screw taps, rotating file.
|
|
K20-K30
|
≥14.15
|
≥92.0
|
≥4000
|
Suitable for machining nickel based alloys, titanium alloys, stainless steel,mould steel,chilled hardened steel and grey cast irons, etc.
It is recommended for making milling tools and reamers. |
Type:
Sintered rods
Rods with central hole
Finished Short Rods/Grounded Rods
Finished Short Rods/Grounded Rods
Finished end mill blanks
Rods with two straight holes