Introduction of PVC wood-plastics profiles production line:
PVC wood-plastics profiles production line Wood and plastic extrusion lines:
the special design of screw extruder barrel, mold machining process and production of wood and plastic products.
Company product series: wood-plastics one-step plate equipment, Wood-plastics one-step profile equipment, Wood-plastics one-step adornment material equipment, Wood grain equipment shaping, All kinds of wood and plastic mould. Extruder single two-stage mixing extruding, also can directly after making two-step extrusion, save electricity, save space, has high yield, stable pressure, preheat the charger on top, first drew most main wood powder residual moisture, make host feeding section richer, Plasticizing mixing effect is good. Optimization design of screw shear small, easy use woodiness fiber cut, can make the material in the retention period inside machine. Screw machine adopt dual metal tube, wear-resisting corrosion, service life greatly extended. This production line can produce PVC or PE, PP, wood and plastic profile tray, mainly used for packing, floor board, outdoor decoration materials, widely used. Wood powder and plant fiber additive quantity high (maximum 50-75); Equipment adaptiveness, while processing PP, PE, ABS, PS, etc.
PVC wood-plastics profiles production line Wood and plastic extrusion lines:
the special design of screw extruder barrel, mold machining process and production of wood and plastic products.
Company product series: wood-plastics one-step plate equipment, Wood-plastics one-step profile equipment, Wood-plastics one-step adornment material equipment, Wood grain equipment shaping, All kinds of wood and plastic mould. Extruder single two-stage mixing extruding, also can directly after making two-step extrusion, save electricity, save space, has high yield, stable pressure, preheat the charger on top, first drew most main wood powder residual moisture, make host feeding section richer, Plasticizing mixing effect is good. Optimization design of screw shear small, easy use woodiness fiber cut, can make the material in the retention period inside machine. Screw machine adopt dual metal tube, wear-resisting corrosion, service life greatly extended. This production line can produce PVC or PE, PP, wood and plastic profile tray, mainly used for packing, floor board, outdoor decoration materials, widely used. Wood powder and plant fiber additive quantity high (maximum 50-75); Equipment adaptiveness, while processing PP, PE, ABS, PS, etc.
Technical data of PVC wood-plastics profiles production line
:
:
|
Model
|
YF180
|
YF240
|
YF300
|
YF600
|
YF900
|
YF1200
|
|
Maximum plate width (mm)
|
180
|
240
|
300
|
600
|
900
|
1200
|
|
Traction height (mm)
|
150
|
150
|
150
|
150
|
150
|
150
|
|
tractiveforce (KN)
|
2
|
2
|
2
|
30
|
40
|
50
|
|
pulling speed (m/s)
|
0-5
|
0-5
|
0-5
|
0-3
|
0-2.5
|
0-2.5
|
|
Auxiliary total power (kw)
|
35
|
35
|
30
|
30
|
40
|
45
|
|
Cooling capacity (m3/h)
|
6
|
6
|
6
|
9
|
12
|
15
|
|
Compressed air pressure(Mpa)
|
0.6
|
0.6
|
0.6
|
0.6
|
0.6
|
0.6
|