Introduction of Gearbox for Conical Twin-screw Rod Extruder:
Gearbox for conical twin-screw rod extruder is a special driving unit matched with conical twin-screw rod extruder.Gearbox for Conical Twin-screw Rod Extruder is consists of two parts, namely, the reduction box and the distribution box.
After reducing speed and increasing torque of the motor, Gearbox for Conical Twin-screw Rod Extruder outputs the motive power to the distribution box, then drives the double output shafts via a pair of small conical spiral gears with driving ratio of 1:1, thus to drive screw rods to rotate outward with different direction.
Gearbox for conical twin-screw rod extruder is a special driving unit matched with conical twin-screw rod extruder.Gearbox for Conical Twin-screw Rod Extruder is consists of two parts, namely, the reduction box and the distribution box.
After reducing speed and increasing torque of the motor, Gearbox for Conical Twin-screw Rod Extruder outputs the motive power to the distribution box, then drives the double output shafts via a pair of small conical spiral gears with driving ratio of 1:1, thus to drive screw rods to rotate outward with different direction.
SZ Series
|
Drive ratio
|
33.4~40
|
|
Output speed r/min
|
37.5~44.9
|
|
Output torque N.m
|
1972~13130 (single shaft)
|
|
Power KW
|
18.5~110
|
|
|
Gearbox for Conical Twin-screw Rod Extruder Application Field
|
Gearbox for Conical Twin-screw Rod Extruder is matched with conical twin-screw rod extruder.