1.Surface Treatment: As the customers' requests
2.Standard:ASTM
3.Good quality and low price
2.Standard:ASTM
3.Good quality and low price
We supply this grade in the following forms: Bar, wire, sheet, plate, coil, fasteners and forgings.
MONEL 400 is a Nickel-Copper alloy, resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. The alloy has excellent corrosion resistance in a wide variety of media. The alloy is characterized by good general corrosion resistance, good weldability and moderate to high strength. The alloy is widely used in the chemical, oil and marine industries.
Typical analysis in percent
|
C
|
MN
|
S
|
Si
|
Ni
|
Cu
|
Fe
|
|
0 .3 max
|
2.0 max
|
0.024 max
|
0.5 max
|
63.0 min
|
28 - 34
|
2.5 max
|
Physical properties
Density:8.80g/cm3
Melting range:1300-1350°C
Typical mechanical properties(At room temperature)
|
Ultimate tensile strength(mpa)
|
Yield strength(mpa)
|
Elongation in 50 mm(%)
|
|
600
|
415
|
30
|