6.5KW 220V 200 pairs /min FSW390 high speed paper handle shopping paper making machine
Introduction:
FSW390 High Speed Paper Handle Making Machine belongs to the fourth generation newly developed by our company. It is good-looking. Its body has a sealed cover for the assurance of the safety in operation. It adopts Frequency Conversion System to get high efficiency, low noise, fast speed as well as easily to operate. It pastes twist paper ropes between two layers of kraft firmly with Hot Melt Adhesive Machine and then cut off them in separate automatically. FSW390 High Speed Paper Handle Making Machine is an ideal accessory of square bottom shopping bag machine.
Specifications:
1.Diameter of paper rope:2-6mm;
2. Width of paper handle:95mm;
3. Width of two paper roll: 60-100mm
3. Output: 200 pairs /min
- Power:6.5Kw;
- Machine size: 3500×1200×1500mm
Handbook of Paper Handle Making Machine
1, Control panel of hot glue machine
Remark: U is temperature controller, can adjust the temperature of glue barrel
1A is temperature controller of glue tube and glue gun (1A tube and gun)
2A is temperature controller of glue tube and glue gun (2A tube and gun)
3A is " not connected "
F:Main cock of glue machine, 220V
left upper side of panel: A.B is temperature indicator screen, A can display temperature of main machine and glue tube, B display temperature of glue
the other buttons not mentioned can keep intact
2, control panel and circuit connection
Remark: A.B is the signal indicator of glue coming out from two glue guns and red black blue connected with proximity switch, 24V power input to electromagnetically operated valve (Model:MAC) of gun.
C red black blue connect with proximity switch of signal of motor start.