MAIN APPLICATIONS
- Connection between fiber to copper 10Gbps Ethernet equipment function as fiber-to-copper media converter for long distance transmission
- Media converter for network backbone(SAN, LAN, MAN)
- Can be applied in Telecommunication room, R&D laboratory, Data center, and etc.
KEY Feature:
- Support Jumbo Frame
- Transparent Transport and very low delay
- Support ITUT prescribed DWDM/CWDM wavelength
- Support DMI function for XFP fiber module
- Support Loopback test function
- Economic In-band Management function
- powerful Network Management function(Web, SNMP, Console)
- Support hot plugging
- Support 2U Rack (16 channel) and standalone use
- Full State Led display
- Easy installation
- UTP cable length detection(only RJ45 interface)
Technical Information:
|
Performance Data
|
Technical Indexes
|
|
Transmission Speed
|
10Gb/s
|
|
Protocols
|
IEEE802.3an(10Gbase-T),IEEE802.3ae(10Gbase-R/LRM)
|
|
Access Type
|
10G LAN
|
|
Interface Type
|
Type: RJ45 To/From XFP
|
|
Transmission Distance
|
XFP module: Up to 80Km
10Gbase-T: 100meters Cat .6a cable
|
|
Maximum Packet
Forwarding Rate
|
14,880,950/S
|
|
Network management
information:
|
• Card type information
• XFP fiber module detection
• XFP fiber module DMI function ( Temperature , Voltage , Optical power )
• Link status detector
• Enable/Disabled Loopback test function
• UTP cable length detection ( only RJ45 interface )
• Remote card's status monitor ( only in pairs )
|
|
power requirement
|
Rack-mountable : AC 85 ～ 220V OR DC -48V
Standalone: AC 220V OR -48V
Power consumption: ≤4W
|
|
Work Environment
|
Operating Temp: 0~ 50 ℃
Storage Temp: -10~ 70 ℃
Humidity: 5%~90% ( non-condensing )
|
|
Dimension
|
Card : 11.5mm ( W ) × 78mm ( D )
Standalone : 156mm ( W ) × 128mm ( D ) × 32mm ( H )
|