Microwave reaction separation equipment for the chemical reaction and separation of materials in the chemical, pharmaceutical, oil, dyes, biochemical, food and other industrial processes, heating and cooling liquid extraction, gas absorption, chemical, physical changes in the process. The microwave reaction separation technology is a new technology used in the chemical industry, medicine and food industry. Microwave reaction separation equipment to achieve the purpose of the reaction and separation based mainly on the chemical and physical changes of different materials under different temperature conditions. Compared with the traditional response separation, the main features of the microwave reaction separation is rapid, energy consumption, less solvent, but also conducive to the polarity and thermally unstable compounds, to avoid a long time at high temperatures due to thermal decomposition. Traditional reactive separation method is based on heat conduction, heat radiation from outside to inside, while the separation of the microwave reaction at the same time heating in the microwave instantly penetrate materials inside and outside, to achieve rapid heating and rapid separation. Microwave reaction separation is not only fast, but the recovery rate is also higher, microwave separation of various metal tin organic compounds in the sediments, compared with the usual separation, the separation time of only 3 minutes, 20 to 100 times lower, on each The separation rate of the metal tin organic compounds increased. Microwave extraction separation device built-in agitator type anchor, anchor box style, turbine-propelled screw spiral belt stirring heated form.Material contact parts are made of 304 or 316 stainless steel, acid board to ensure that raw materials and chemical properties and reactions to separation of the life of the kettle body. The time required of the microwave separation with the traditional method of compound recovery (%)
  Microwave microwave separation of the traditional method of separation of traditional methods of
Natural fats 98100 <5 minutes> 3h
Pesticides 10090 <1 minute <1.5h
Autinutritives 100 40 <5 minutes ≥ 3h

Equipment technical parameters: l power input: three-phase 380V ± 10% or two-phase 220V ± 10%, 50Hzl microwave frequency: 2450MHz the ± 50MHZl l microwave leak: meet national standards ≤ 5 mw/cm2l around non-corrosive gases, conductive dust and explosive gas l automatic control of heating time and heating temperature microwave extraction separation characteristics of the equipment: separation of 1, reaction speed, 2, energy efficient, time of reaction separation, the material response uniformity, product quality, easy to control advanced, process characteristics, health and safety, environmental protection, no "three wastes".