Self-Absorption Flotation Machine is widely used in the roughing, concentration, and reverse flotation of those non-ferrous metal like cuprum, plumbum, zinc, nickel, molybdenum, ferrous metal and nonmetal mine.

The flotation cell is widely used in ore concentration.
The impellers are driven through V- belt transmission, which brings centrifugal effect to form the negative pressure. On the one hand, the flotation machine inhales sufficient air to mix with ore slurry; on the other hand it stirs ore slurry and mix with medication to form the mineralized froth. Adjust the height of flashboard to control the liquid level and make the useful froth scraped by loam board.

Usage of Flotation Equipment:
Check the bolts before starting the machine and use hand instead of impellers to prevent the sediment from adding the burden of electromotor. Adjust the height of strobe carefully to keep the stabilization of liquid level and scrape the mineralized froth to the launder. The impellers and stators should have a distance and should be changed when they are worn. The bearing in the pump should be maintained every three months.

Main Technical Parameters:

Model			XJK-0.35	XJK-0.62	XJK-1.1	XJK-2.8(6A)	XJK-5.8
			(3A)	(4A)	(5A)		(7A)
Effective Cubage (m3)			0.35	0.62	1.1	2.8	5.8
Production Capacity (m3/min			0.18-0.4	0.3-0.9	0.6-1.6	1.5-3.5	3-7
Rotation Speed (r/min)			470	400	330	280	240
Blade Diameter (mm)			300	350	500	600	750
Motor	Model	Rotor	Y90L-4	Y100L2-4	Y132M2-6	Y160L-6	Y200L2-4
							(255M-6)
		Scraping Plate	Y90S-4	Y90S-4	Y90S-4	Y90S-4	Y90L-4
		Blade Motor	1.5	3	5.5	11	22(30)