chrome plating rectifier
1.IGBT module2.PWM &full bridge control
3.complete function &self protection
1.IGBT module2.PWM &full bridge control
3.complete function &self protection
chrome Plating rectifiers DR-3000A-18V
It has output over-current, short circuit , over-heating, and lack phase
protection functions. This rectifier can also be used for general plating
25HZ AC output symmetrical or asymmetrical. output current size and
positive / negative half-wave symmetry or asymmetry ratio can be adjusted.
Forward \ reverse current are adjustable and working hours are
adjustable.
Equipped with remote control box of anti-corrosion .It makes the plating
tank and rectifier isolation, thus prolonging the life of the rectifier.
We can provide RS485 or RS232 interface or standard 4-20MA,0-5V
general Interface,we can also provide Ampere-hour meter.
protection functions. This rectifier can also be used for general plating
25HZ AC output symmetrical or asymmetrical. output current size and
positive / negative half-wave symmetry or asymmetry ratio can be adjusted.
Forward \ reverse current are adjustable and working hours are
adjustable.
Equipped with remote control box of anti-corrosion .It makes the plating
tank and rectifier isolation, thus prolonging the life of the rectifier.
We can provide RS485 or RS232 interface or standard 4-20MA,0-5V
general Interface,we can also provide Ampere-hour meter.
Input voltage | 380V AC(Three-phase four-wire) 415V AC 50-60HZ |
Ouput DC current | 100-3000A Arbitrary choice |
Ouput DC voltage | 14v,16V Arbitrary choice |
Voltage stability | ≤1% |
Current stability | ≤1% |
Output Frequency | 25HZ |
Working time | Forward direction:1S-99H99M setting Reverse:1S-99H99M setting |
Ripple factor | 3%-5% |
Cooling Mode | Forced air cooled Or Water cooled |
workload | Full capacity operation, more than 1,000 meters above sea level, reduced load operation |
working atmosphere | Temperature range 0 °C ~ 40 °C,Less than 90% humidity |