Descriptions for BMW and Mercedes Seat Occupant Sensor Emulator
Seat Occupant Sensor Emulator
Fabricated stringently as per specifications obtained from the automaker, BMW and Mercedes Seat Occupant Sensor Emulator are prized by users all over the United States for their outstanding performance, alluring looks and unbeatable resilience.
Possible Modes:
1. Older BMW (1996-2004) E38 E39 E46 E53 E83 and similar where direct connection to AIRBAG ECU take places. NOT working where seat modules are connected directly to K-BUS.
Occupied:
Jumper 2 SHORTED
Jumper 1 SHORTED
Not Occupied:
Jumper 2 SHORTED
2. Mercedes Benz (1997 2001) TRW Airbag unit A-class W168, C-class W202, Vito W638, ML, etc.
Occupied:
Jumper 3 SHORTED
Jumper 1 SHORTED
Not Occupied:
Jumper 3 SHORTED
3. Mercedes Benz (2000 2004) A-class W168, C-class W203, CLK W209, Vaneo, E-class W210, Sclass W220, Vito W639, ML W163, etc.
Occupied:
Jumper 4 SHORTED
Jumper 1 SHORTED
Not Occupied:
Jumper 4 SHORTED
By default device is shipped in mode BMW, occupied as pictured:
Warranty:
Easy Plug&Play installation System
Good quality product
1 Years Warranty
What is seat occupancy sensor emulator used for?
When you car's seat occupancy sensor is faulty, the airbag alarm light will light on, and the SRS system will not work properly. In this case, you can use our seat occupancy sensor emulator to replace the fauty sensor. After install the emulator in your car, the airbag alarm light will turn off and the SRS system will work properly.