Operating environment:
In great broken stones into small stones,the first crusher is often reffered to as master crusher,which is he longest history anf most strong jaw crusher. for the jaw crusher feed,the material from the top of the entrance into the broken tooth containing E Room.E-Gear with great strength of the top material to the wall,it will not be broken into smaller stones.Supporting E-Gear is an eccentric excerise-axis,thisaxis runs through the fuselage framework.Eccentric exercise is usually fixed at both ends the flywheelshaft araising.Flywheel and eccentric exercise  is frequently used to support the bearings spherical roller bearings, bearing extremely harsh working environment. Bearings must bear the enormous impact load, abrasive and high temperature water. Despite this extremely harsh working environment, Hubei crusher still very reliable, which is to ensure the productivity of a key element. 

Jaw Crusher Working Principle:

Jaw Crusher has the structure of the main frame, eccentric shaft, the pulley, flywheel, moving E, side retaining plate, toggle plate, toggle plate rear screw transfer gap, reset spring, fixed plate and Events E-E group, etc. into which bracket also played the role of insurance. This series of jaw crusher broken for Qu Dynamic extrusion type, motor-driven belt and pulley, through the eccentric shaft so that moving up and down E-Sports, when the dynamic rise toggle plate and moving large angle between E, thereby promoting actin E board to set board close to E, at the same time material was extruded, molded, milled multiple broken; when moving down link, the toggle plate and moving smaller angle between E, E-board in the bar moving, springs from the role of E-board is scheduled at this time has been broken material from the mouth from under the crushing chamber, as the motor for rotating motor broken for cyclicalcrushing and nesting, to achieve mass production.

Jaw Crusher Features:

 1. Shattered deep cavity, there is no dead zone, improve the capacity and output of the feed;
2. Its broken than large, the product particle size uniformity;
3. Gasket type I adjust nesting devices, and ease of adjustment range, and increase the flexibility of the equipment;
4. Lubrication system is safe and reliable, convenient replacement parts, maintenance workload small;
5. The structure of easy, reliable, low operating costs.
6. Equipment energy: stand-alone energy-saving 15% ~ 30%, the system energy-saving more than doubled;
7. I adjust nesting range, to meet the requirements of different users;
8. Low noise and less dust.

Jaw crusher technical parameters:

 

 

Model	Feed inlet size(mm)	Max inlet size(mm)	Capacity (t/h)	Electric power(kw)	Overall size LxWxH(mm)	Weight (t)
PE150×250	150×250	125	1-5	5.5	875×758×850	0.81
PE250×400	400×250	210	5-20	15	1450×1315×1296	2.8
PE400×600	600×400	340	16-65	30	1565×1732×1586	6.5
PE500×750	750×500	425	45-100	55	1890×1916×1870	10.1
PE600×900	900×600	500	50-120	55-75	2305×1840×2298	15.5
PE750×1060	1060×750	630	52-180	110	2450×2472×2840	28
PE900×1200	900×1200	750	140-260	135	3200x3050x2950	54.5
PE1000×1200	1000×1200	850	315-342	135	3335x3182x3025	57
PE1200×1500	1200x1500	1020	400-800	160	4200x3750x3820	100.9
PEX250×1000	1000×250	210	16-52	30-37	1530x1992x1380	6.5
PEX250×1200	1200×250	210	20-60	37	1900x2192x1430	7.7