in line with European norm BS EN88 and standard UNI-CIG7430;
maximum pressure (working) is 5bar.


Technical Parameters:

1.Inlet pressure:P1max 5bar

2.Outlet pressure:P2:1.3Kpa to 150Kpa(13-1500mbar)

3.Regulation accuracy(AC):less than or equal to  plus-minus 10%

4.closed pressure(SG):less than or equal to 10%

5.cut off accuracy(AG):less than or equal to 10%

6.Applicable Medium:noncorrosive gases , for example:gas, natural gas, LPG etc. 

7.Medium temperature: minus 20 celsius degree to 60 celsius degree

8.Max medium temperature:60 celsius degree
9.Connection type:Flange(according with ISO7005)

10. Pressure Range:Reference spring pressure range table

11.closed time:less than 1second

12. mechanical strength:the 2second(accord with EN13611:2007)


* The regulator with a guide device(P2=200-1500mbar)

Installation matters needing attention and demonstration figure

1. The regulator pipeline does not allow to have the impurities, Must sweep the pipeline.

2. Gas inlet pressure regulator must not be more than the pressure rated.

3. Must be put on the hair according to indicate the gas flow direction perpendicular installation, and keep the diaphragm level.

4. Must be connected external take pressure pipe G3/8" to export side piping

5.Must be connected discharge atmospheric tubeG3/4".