Feathures of Laser Engraving Cutting Machine / Laser Engraver: Model UT-1390
Coreldraw & AutoCAD Output Directly
Work by U -Flash Disk Directly, Offline Working Without Computer
Air Compressor Assistance
Water Protection
Smoke Exhaust System
Water Chiller
Two Years Warranty Except Consumables
Coreldraw & AutoCAD Output Directly
Work by U -Flash Disk Directly, Offline Working Without Computer
Air Compressor Assistance
Water Protection
Smoke Exhaust System
Water Chiller
Two Years Warranty Except Consumables
Descriptions of Laser Engraving & Cutting Machine Model UT-1390
Work Area: 1300x900mm54"X36"
Laser power: 80W (60W , 100W & 120W Optional)
Laser Tube Type: CO2 Glass Tube
Location Precision: < 0.01mm
Resolution: User controlled from 100 to 1000DPI
Control System: 32 BIT DSP
Memory: 40M flash memory in the machine
Supported Image Formats: AI, DXF, BMP, GIF, JPG, PNG, MNG, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW, PLT, DST, DSB
Machine Dimension: 2100x1700x1500 mm
Packing: Plywood Case
Net Weight: 280KGS
Gross Weight: 350KGS
Interface: USB2.0
Power Requirements: AC220V (or110V) ± 10% 50/60HZ
Laser power: 80W (60W , 100W & 120W Optional)
Laser Tube Type: CO2 Glass Tube
Location Precision: < 0.01mm
Resolution: User controlled from 100 to 1000DPI
Control System: 32 BIT DSP
Memory: 40M flash memory in the machine
Supported Image Formats: AI, DXF, BMP, GIF, JPG, PNG, MNG, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW, PLT, DST, DSB
Machine Dimension: 2100x1700x1500 mm
Packing: Plywood Case
Net Weight: 280KGS
Gross Weight: 350KGS
Interface: USB2.0
Power Requirements: AC220V (or110V) ± 10% 50/60HZ
| Laserable Materials | ||
| Engrave | Cut | |
| Laserply (Dual Color Laminate) | Yes | Yes |
| Wood | Yes | Yes |
| Acrylic | Yes | Yes |
| Glass | Yes | |
| Coated Metals | Yes | |
| Ceramic | Yes | |
| Delrin | Yes | Yes |
| Cloth | Yes | Yes |
| Leather | Yes | Yes |
| Marble | Yes | |
| Matte Board | Yes | Yes |
| Melamine | Yes | Yes |
| Paper | Yes | Yes |
| Mylar | Yes | Yes |
| Pressboard | Yes | Yes |
| Rubber | Yes | Yes |
| Wood Veneer | Yes | Yes |
| Fiberglass | Yes | Yes |
| Painted Metals | Yes | |
| Tile | Yes | |
| Plastic | Yes | Yes |
| Cork | Yes | Yes |
| Corian | Yes | Yes |
| Anodized Aluminum | Yes | |
| Ceramics | Yes | |
| Stainless Steel | * | |
| Brass | * | |
| " *" means you have to use a spray called " thermark" to spray the surface of the material and then you can mark on it. | ||