FW 1.5 In-flow Pressure Screen before head box
*Main specifications
Model: FW1.5
Screen area: 1.5㎡
Slot size: 0.2mm wedge wire type
Inet pulp pressure: 0.1-0.25Mpa
Inlet pulp consistency: 0.3-1%
Capacity: 60T/D
Joint pipe size:: ①Inlet: DN250mm
② Accept outlet: DN250mm
③ Reject outlet: DN80mm
④Air discharge: 2in
Motor power: 30KW-4P
Sealing type: seal by cooling water, its pressure is 0.1 Mpa higher than inlet pulp
Flow 3-8L/min
Drive by narrow V belt
Bearing: self aligning roller bearings
Bearing lubrication: lithium grease
Pressure test: by diaphragm seal gauge, test range 0-0.6 Mpa.
Equipment weight: 2000kg
Overall dimension:1945x1038x1960mm
*Supply scope:
Main machine 1 set, motor 1 set, diaphragm pressure gauge 2 pcs, V belt 1 group, anchor bolts 4 sets, base for motor 1 pc, big and small pulley each 1 pc, mechanical sealing 1 pc
*Material construction:
SUS316L for basket, SS304 for parts touch with pulp, body board thickness δ=8mm, inside polished, outside sand blasting, MS Q235 welding for base, 40Cr tempered for main shaf