Reinforcing Bar Welded Mesh Sheet/Steel Bar Welded Wire Mesh
Description
We offer heavy type welded wire mesh panels including steel bar welded wire mesh.
Wire diameter for welded steel bar panels ranges from 5mm to 16mm.
Welded bar panels opening: 75mm to 300mm.
Panel length: 100cm to 1400cm.
Panel width: 100cm to 300cm.
Applications: Welded steel bar panels are widely used in construction reinforcement, the ground for the tunnels, bridges, highway, airport and wharf, also in construction of wall body.
| Technical Data | GWC2400 | GWC2600 | GWC3000 |
| Horizontal Spacing | 100,200,300,400 | 100,200,300,400 | 100,200,300,400 |
| Vertical Spacing | 50-600 | 50-600 | 50-600 |
| Wire Diameter | 5-12 | 5-12 | 5-12 |
| Max. Panel Length | 2400 | 2600 | 3000 |
| Welding Materials | Heated crimped round, electro galvanized round, heated crimped with rib, electro crimped with ribs | ||
Min order is ONE 40HQ.
According to national standard " road tunnel design specification" JTGD70-2004 requirements.
Shotcrete should be located within the ribbed welded steel, concrete help to improve the jet shear and flexural strength, the ability to improve concrete' s resistance to punching, bending capacity, enhance the integrity of sprayed concrete, sprayed concrete to reduce shrinkage cracks, prevent local off blocks. Welded steel grid should press the rectangular layout, steel welded steel spacing of 150 ~ 300mm. Can be 150mm × 150mm, 200mm × 200mm, 200mm × 250mm, 250mm × 300mm, 300mm × 300mm combinations. Lap length of welded steel not less than 30d (d is the bar diameter).
Welded steel protective layer of sprayed concrete thickness of not less than 20mm, when using double-welded steel, the welded steel between two layers of the interval distance of not less than 60mm.
Shotcrete should be located within the ribbed welded steel, concrete help to improve the jet shear and flexural strength, the ability to improve concrete' s resistance to punching, bending capacity, enhance the integrity of sprayed concrete, sprayed concrete to reduce shrinkage cracks, prevent local off blocks. Welded steel grid should press the rectangular layout, steel welded steel spacing of 150 ~ 300mm. Can be 150mm × 150mm, 200mm × 200mm, 200mm × 250mm, 250mm × 300mm, 300mm × 300mm combinations. Lap length of welded steel not less than 30d (d is the bar diameter).
Welded steel protective layer of sprayed concrete thickness of not less than 20mm, when using double-welded steel, the welded steel between two layers of the interval distance of not less than 60mm.