Feathures of Laser Cutting Machine (Model UT-1490R) (Roller System Type)
Laser Cutting Machine
With High Precision Roller System Rail
With Lid Open Laser Stop Switch
With Red Light Laser Pointer ,Easy to Adjust Focus
Amber Glass standard
Coreldraw & AutoCAD Output Directly
Work by U -Flash Disk Directly, Offline Working Without Computer
Colored Display DSP Control With Auto & Manual Laser Power Adjusting
Air Compressor Assistance/ Air Blower
Water Protection,Laser come out only when Water Circulation normal for Cooling
Smoke Exhaust System
Water Chiller/ Industrial Chiller
Machine Structure and Color Optional
UCAMTEC Super Long Time Warranty of 2 years With Professional Aftersales Services:
Two Years Warranty Except Consumables ,Make Your Purchase More Secured
With High Precision Roller System Rail
With Lid Open Laser Stop Switch
With Red Light Laser Pointer ,Easy to Adjust Focus
Amber Glass standard
Coreldraw & AutoCAD Output Directly
Work by U -Flash Disk Directly, Offline Working Without Computer
Colored Display DSP Control With Auto & Manual Laser Power Adjusting
Air Compressor Assistance/ Air Blower
Water Protection,Laser come out only when Water Circulation normal for Cooling
Smoke Exhaust System
Water Chiller/ Industrial Chiller
Machine Structure and Color Optional
UCAMTEC Super Long Time Warranty of 2 years With Professional Aftersales Services:
Two Years Warranty Except Consumables ,Make Your Purchase More Secured
Technical Details of Laser Engraving & Cutting Machine Model UT-1490R
Work Area: 1400x900mm 56"X32"
Laser power: 80W (60W , 100W & 120W Optional)
Laser Tube Type: CO2 Glass Tube
Location Precision: < 0.01mm
Resolution: User controlled from 100 to 1000DPI
Control System: 32 BIT DSP
Memory: 40M flash memory in the machine
Supported Image Formats: AI, DXF, BMP, GIF, JPG, PNG, MNG, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW, PLT, DST, DSB
Machine Dimension: 2100x1700x1500 mm
Packing: Plywood Case
Net Weight: 380KGS
Gross Weight: 450KGS
Interface: USB2.0
Power Requirements: AC220V (or110V) ± 10% 50/60HZ
Laser power: 80W (60W , 100W & 120W Optional)
Laser Tube Type: CO2 Glass Tube
Location Precision: < 0.01mm
Resolution: User controlled from 100 to 1000DPI
Control System: 32 BIT DSP
Memory: 40M flash memory in the machine
Supported Image Formats: AI, DXF, BMP, GIF, JPG, PNG, MNG, TIF, TGA, PCX, JBG, JP2, JPC, PGX, RAS, PNM, SKA, RAW, PLT, DST, DSB
Machine Dimension: 2100x1700x1500 mm
Packing: Plywood Case
Net Weight: 380KGS
Gross Weight: 450KGS
Interface: USB2.0
Power Requirements: AC220V (or110V) ± 10% 50/60HZ
| Laserable Materials | ||
| Engrave | Cut | |
| Laserply (Dual Color Laminate) | Yes | Yes |
| Wood | Yes | Yes |
| Acrylic | Yes | Yes |
| Glass | Yes | |
| Coated Metals | Yes | |
| Ceramic | Yes | |
| Delrin | Yes | Yes |
| Cloth | Yes | Yes |
| Leather | Yes | Yes |
| Marble | Yes | |
| Matte Board | Yes | Yes |
| Melamine | Yes | Yes |
| Paper | Yes | Yes |
| Mylar | Yes | Yes |
| Pressboard | Yes | Yes |
| Rubber | Yes | Yes |
| Wood Veneer | Yes | Yes |
| Fiberglass | Yes | Yes |
| Painted Metals | Yes | |
| Tile | Yes | |
| Plastic | Yes | Yes |
| Cork | Yes | Yes |
| Corian | Yes | Yes |
| Anodized Aluminum | Yes | |
| Ceramics | Yes | |
| Stainless Steel | * | |
| Brass | * | |
| " *" means you have to use a spray called " thermark" to spray the surface of the material and then you can mark on it. | ||