Application and Installation
The pump can be used to delivery soft water, thin, clean, non-corrosive, non-explosive liquids without solid granules, fibre and mineral oil for circulation pipeline, water-heat system and obturation - patterned industrial circulation system.
The pumps shall be installed in enclosed places, or at least protected against inclement weather.
The pump can be used to delivery soft water, thin, clean, non-corrosive, non-explosive liquids without solid granules, fibre and mineral oil for circulation pipeline, water-heat system and obturation - patterned industrial circulation system.
The pumps shall be installed in enclosed places, or at least protected against inclement weather.
Structure Feature
Pump body: Cast iron
Motor Bracket: Aluminum
Impeller: PP
Motor shaft: Ceramic
Sealed part: Shielding can
Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available.
Suitable Fluids
Pump body: Cast iron
Motor Bracket: Aluminum
Impeller: PP
Motor shaft: Ceramic
Sealed part: Shielding can
Electric motor: Single-phase 220V - 50Hz with capacitor and thermal overload protector. Voltage fluctuation for 10% more or less is allowed and other voltage for 60Hz is also available.
Suitable Fluids
Heating water to VD12035
Heating water
Water /glycol mixtures max.mixing ratio 1:1
Performance
Fluid temperature range -10°C--+110°C
Max.working pressure 10bar
Ambient Temperature
Permissible up to 40°C
Motor
Degree of protection IP44
Insulation class F
Mounting Positions
Pump shaft the horizontal plane
Pump Equipment
Screwed end single head pump
Manual 3-pseed control
Non-overloading single phase motor
Pump body length: 130mm