F2000TSM-O3 is used to indicate environment ozone level. With its dry-contact of relay output, a fan or an O3 generator can be controlled turning-on/off when ambient O3 measurement reaches its pre-set point.
F2000TSM-O3 can provide RS-485 communication interface with independent address, it can be connected with a PC or another control system to make management and control intelligently.
Features
Wall mounting, real time detect O3 with measuring range as 10~1000ppb.
With semiconductor ozone gas sensor inside. More than 5 years lifetime.
Full time indicate O3 level, special design with 6 indicator lights to indicate different O3 levels.
Six different ozone range corresponds with different lights indicating.
The on/off output optional for control a fan or an O3 generator.
Four setting ozone level ranges can be selectable to control the relay output via a set of jumpers.
RS-485 communication interface optional with 15KV antistatic protection, independent address setting.
Specifications
Gas detected
Ozone
Sensing element
Semiconductor ozone gas sensor
Power Supply
18~38VAC/VDC
Consumption
2.2 W
Warm up time
96 hours (first time) 1 hour(operational)
Signal Update
2s
O3 Measuring Range
10~1000ppb
Six indicator lights
The first green indicator light: O3＜200ppb
The first and the second green indicator lights: 200ppb≤O3＜400ppb
The first yellow indicator light: 400ppb≤O3＜600ppb
The first and the second yellow indicator lights: 600ppb≤O3＜800ppb
The first red indicator light: 800ppb≤O3＜1,000ppb
The first and the second indicator lights: O3 ≥1,000ppb
Relay output
One dry contact output, rated switching current 2A(resistance load).
Provide four O3 ranges to be selected to control the relay turn-on/turn-off
Communication rate
RS485, 9600/14400/19200(default), 28800 bps, 38400 bps (programmable selection), 15KV antistatic protection, 3 independent base address, 31 max network nodes
Operation temperature
0～50℃ (32～122℉)
Operation humidity
0～95%RH, non condensing
Storage conditions
-40～70℃ (-40～158℉)
Weight
190g
Dimensions
100mm×80mm×28mm
Installation standard
65mm×65mm or 2”×4” wire box
Wiring terminals (max.)
6
Housing/ IP rate
PC/ABS plastic fireproof material, IP30
Quality System
ISO 9001 0,2-10VDC24VAC/VDCRS-485G00,1-5VDC324OUTNO765COMBA1G+F2000TSM-VOC/CO/O3-X-1XX0,4-20mA Wiring Diagram
F2000TSM-O3-L100/L100C/L101/L101C
Models
ITEM
MODEL
DESCRIPTION
F2000TSM-O3-L100
Ozone indicator with 6 LED indicator lights
F2000TSM-O3-L100C
Ozone indicator with 6 LED indicator lights
RS485 communication interface
F2000TSM-O3-L101
Ozone indicator with 6 LED indicator lights
One dry contact output
Ozone Indicator/
Controller
F2000TSM-O3-L101C
Ozone indicator with 6 LED indicator lights
One dry contact output, RS485 communication interface
Shipping Information
Indiv. Ctn. Dim
115mm×95mm×45mm
Master Ctn. Qty
80
Master Ctn. Dim
44cm(L)×32cm(W)×32cm(H)
Master Ctn. Wt.
16KG
Mounting 60.0045.0055.0028.003.004.50v
F2000TSM-O3 can provide RS-485 communication interface with independent address, it can be connected with a PC or another control system to make management and control intelligently.
Features
Wall mounting, real time detect O3 with measuring range as 10~1000ppb.
With semiconductor ozone gas sensor inside. More than 5 years lifetime.
Full time indicate O3 level, special design with 6 indicator lights to indicate different O3 levels.
Six different ozone range corresponds with different lights indicating.
The on/off output optional for control a fan or an O3 generator.
Four setting ozone level ranges can be selectable to control the relay output via a set of jumpers.
RS-485 communication interface optional with 15KV antistatic protection, independent address setting.
Specifications
Gas detected
Ozone
Sensing element
Semiconductor ozone gas sensor
Power Supply
18~38VAC/VDC
Consumption
2.2 W
Warm up time
96 hours (first time) 1 hour(operational)
Signal Update
2s
O3 Measuring Range
10~1000ppb
Six indicator lights
The first green indicator light: O3＜200ppb
The first and the second green indicator lights: 200ppb≤O3＜400ppb
The first yellow indicator light: 400ppb≤O3＜600ppb
The first and the second yellow indicator lights: 600ppb≤O3＜800ppb
The first red indicator light: 800ppb≤O3＜1,000ppb
The first and the second indicator lights: O3 ≥1,000ppb
Relay output
One dry contact output, rated switching current 2A(resistance load).
Provide four O3 ranges to be selected to control the relay turn-on/turn-off
Communication rate
RS485, 9600/14400/19200(default), 28800 bps, 38400 bps (programmable selection), 15KV antistatic protection, 3 independent base address, 31 max network nodes
Operation temperature
0～50℃ (32～122℉)
Operation humidity
0～95%RH, non condensing
Storage conditions
-40～70℃ (-40～158℉)
Weight
190g
Dimensions
100mm×80mm×28mm
Installation standard
65mm×65mm or 2”×4” wire box
Wiring terminals (max.)
6
Housing/ IP rate
PC/ABS plastic fireproof material, IP30
Quality System
ISO 9001 0,2-10VDC24VAC/VDCRS-485G00,1-5VDC324OUTNO765COMBA1G+F2000TSM-VOC/CO/O3-X-1XX0,4-20mA Wiring Diagram
F2000TSM-O3-L100/L100C/L101/L101C
Models
ITEM
MODEL
DESCRIPTION
F2000TSM-O3-L100
Ozone indicator with 6 LED indicator lights
F2000TSM-O3-L100C
Ozone indicator with 6 LED indicator lights
RS485 communication interface
F2000TSM-O3-L101
Ozone indicator with 6 LED indicator lights
One dry contact output
Ozone Indicator/
Controller
F2000TSM-O3-L101C
Ozone indicator with 6 LED indicator lights
One dry contact output, RS485 communication interface
Shipping Information
Indiv. Ctn. Dim
115mm×95mm×45mm
Master Ctn. Qty
80
Master Ctn. Dim
44cm(L)×32cm(W)×32cm(H)
Master Ctn. Wt.
16KG
Mounting 60.0045.0055.0028.003.004.50v