Fujikura FSM-60S Fusion Splicer Kit w/ Fiber Cleaver
ALiTester offers a one year manufacturer’s warranty on Fujikura FSM-60S fiber splicing machine.
Features:

• Fujikura FSM-60S Fusion Splicer
• Fujikura CT-30A High Precision Fiber Cleaver w/ Hard Case & Instuction Sheet
• Fujikura ADC-13 AC Adapter/Battery Charger
• Fujikura BTR-08 Battery Pack
• Fujikura DCC-14 Battery DC Charger Cord
• AC Power Cord
• RS232 PC Interface Cable
• Spare Electrode Set
• Cooling Tray
• Carrying Strap
Specifications:

 

Applicable type of fibers	SM (ITU-T G.652) MM (ITU-T G.651 DS (ITU-T G.653) NZDS (ITU-T G.655)
Fiber Count	Single
Applicable fiber dimensions	Cladding Diameter: 80 to 150μm. Coating diameter: 100 to 1000μm
Fiber setting and cleaved length	Sheathe clamp A (standard): For coating dia. up to 250μm (8 to 16mm cleave) coating dia. of over 250μm (16μm cleave) Sheathe clamp B (option): For coating dia. up to 1000μm (8 to 16mm cleave) Sheathe clamp C (option): For 900μm dia. loose tube fiber (8 to 16mm cleave) Fiber holder (option): FH-60-250 and FH-60-900 (10mm cleave)
Splicing modes	Total 100 modes
Typical splice loss	0.02dB with SM 0.01dB with MM 0.04dB with DS 0.04dB with NZDS (Measured by cut-back method relevant to ITU-T standard)
Return loss	>>60dB
Splicing time	Typical 9 sec. with SM FAST 10 sec. with SM AUTO 13 sec. with AUTO modes with standard SM (ITU-T G.652)
Arc Calibration Method	Automatic Real-time and by using results of previous splice when in AUTO mode Manual arc calibration function available
Splice Loss Estimate	Available
Attenuation splice function	Intentional high splice loss of 0.1dB to 15dB (0.1dB step) can be made for an in-line fixed attenuator.
Tube heater / heating time	Built-in tube heater with 30 heating modes / Typical 30 sec. with Fujikura FP-03
Applicable protection sleeve	60mm 40mm and Fujikura FPS01 series
Storage of splice result	the last 2000 results to be stored in the internal memory
Tension test	1.96 to 2.25N
Operating condition	0 to 5,000m above seal level, 0 to 95%RH and -10 to 50oC and up to 15m/s wind velocity, respectively
Storage Condition	0 to 95%RH and -40 to 80oC respectively. Battery: -20 to 30o for long term
Dimensions	136Wx161Dx143H (mm) excluding rubber foot
Weight	2.3kg with AC adaptor ADC-13 2.7kg with battery BTR-08.
Viewing method and display	Two CMOS cameras and 4.1" color LCD monitor
Fiber view and magnification	X/Y (300X magnification), or both X and Y simultaneously (187X magnification)
Power Supply	Applicable voltage from 100 to 240V AC or 10 to 15V DC with ADC-13. 13.2V DC with BTR-08
No. of splice cycles with battery	Typical 160 cycles (splice / tube heat) with BTR-08
Electrode Life	2500 arc-discharges
Terminals	USB 1.1 (Mini-B type) connector for PC communication. 6-pin Mini-DIN connector for HJS-02, HJS-03 or SH-8C power supply