Product Main

Specifications

Shanxi kewell industrial co.,ltd produce the Ductile cast Iron Pipes with Push on Joint, K9,it confirms to ISO2531-1998 and EN545:2002, including the rubber ring in according to ISO4633, the coating of the pipe is the internally cement mortar lining and externally rich zinc plus bitumen coating . if you have the requirement for them, Please contact us : sx.kewell at yahoo.cn .
 
 
Ductile Iron Pipes
Specifications:
Size : DN 80 - 1,200 mm
Standard  : ISO 2531 -1998, EN545-2006 ,EN598-2007  K8/k9
Effective length: 6M , 5.7 or 5.6 m   
Process : centrifugal casting .
Coating : Cement lining inside ( Portland cement line as per ISO4179 ) , Zinc ( at least 130gsm as per ISO 8179) and bitumen coating (at least 70um as per ISO 8179 )outside .
Accessories : Gaskets are NBR ,SBR,or EPDM rubber , tightness ring as per ISO4633
 
Chemical composition
Chemical composition
Ductile Cast Iron Pipe(%)
Grey iron pipe(%)
Steel pipe(%)
C
3.5-4.0
3.2-3.8
0.1-0.2
Si
1.9-2.6
1.4-2.2
0.15-0.4
Mn
0.15-0.45
0.4-0.6
0.3-0.6
P
less than 0.06
less than 0.3
0.02-0.03
S
less than 0.02
less than 0.1
0.02-0.03
Mg
0.03-0.06
 
 
Process and testing:
a)  Blast furnace (Analysis of raw materials test )
b)  Mg treatment (Micro & chemical composition test)
c)  Pipe spinning (Temperature test)
d)  Heat treatment (Micro structure; Flattening test)
e)  Zinc coating (Thickness testing)
f)  Dimensional checks (Thickness & Dia. testing)
g)  Hydraulic test (Pressure test)
h)  Internal lining (Thickness testing)
i)  External coating (Thickness test)
Mechanical joint pipe and fittings are also available.
Packing: 20 , 40 or bulk shipment .