Description
PT124B-123/123T Series Melt Pressure Transducer(Flexible stem & High accuracy )can measure the pressure and temperature in one point. The model PT124B-123T is with thermocouple. This series adopts special construction and excellent alloy elastic membrane to reduce the thermal draft and improve the accuracy. Zero & full span can be adjustable, amplified signal can be connected with PLC, which is the international standard. It is suitable for pressure measuring and controlling in melt fluid medium, such as the plastic & polymer in the process equipments. Can replace Dynisco / Gefran /GP50 etc. international brand absolutely .
PT124B-123/123T Series Melt Pressure Transducer(Flexible stem & High accuracy )can measure the pressure and temperature in one point. The model PT124B-123T is with thermocouple. This series adopts special construction and excellent alloy elastic membrane to reduce the thermal draft and improve the accuracy. Zero & full span can be adjustable, amplified signal can be connected with PLC, which is the international standard. It is suitable for pressure measuring and controlling in melt fluid medium, such as the plastic & polymer in the process equipments. Can replace Dynisco / Gefran /GP50 etc. international brand absolutely .
- Chemical fiber & spinning Equipment
- Plastic and rubber, polyester process equipment
-
Other pressure measurement and Control
Feature
- High-standard quality
- Stainless steel Seal
- Simple Installation
- Completely interchange similar import products
- Internal 80% calibration
- Excellent stability
Specification
|
Pressure range:
|
0….3.5MPa to 0….150MPa
|
|
Output:
|
2mV/V; 3.33mV/V; 0~5V; 0~10V; 4-20mA;
|
|
Input voltage:
|
10(6~12V)DC; 24(12~36V)DC
|
|
Accuracy:
|
±0.25FSO ; ±0.5%FS
(including linearity , Repeatability & Hysteresis )
|
|
Repeatability:
|
±0.2% FSO
|
|
Construction:
|
Wheatstone bridge
|
|
Bridge resistance:
|
Input: 345 Ohms Minimum; Output: 350 Ohms±10%
|
|
Overload pressure:
|
1.5×FSO
|
|
Internal shunt calibration:
|
80%±1%
|
|
Insulation Resistance:
|
200Megohms @100Vdc
|
|
Standard wetted Parts
|
Diaphragm coated 15-5PH SST
|
|
Mounting Torque
|
500inch/lbs , maximum
|
|
Max. Diaphragm Temp:
|
0~400℃
|
|
Electronic operating temperature:
|
-25℃ -85℃
|
|
Electric connector:
|
6PIN
|
|
Thermocouple type:
|
J,K,E,PT100 Optional(PT124B-123T)
|
|
Process connector:
|
1/2″-20UNF, M14×1.5, M18×1.5(Customer design)
|
Ordering Guide
|
Model
|
Range(bar)
|
Output
|
Screw Thread
|
Electric connection
|
Other requirement
|
|
PT124B-123/123T
|
---
|
---
|
---
|
---
|
---
|
|
Example: PT124B-123-500Bar-4/20mA-1/2-20UNF-6PIN
|
|||||