This item includes:
1 PC Nema 34 Stepper Motor with single shaft 1600oz-in holding torque,
1 PC Stepper Driver DQ860MA with 7.8A peak current,24-80VDC,256 Microstep replacing MD882,
1 PC 200W,60VDC Power supply
1 PC Breakout board & Cable
1, Stepper Motor
1, Technical Specifications
Part No.: WT85STH151-3004A
Frame Size: NEMA34
Step Angle: 1.8 degree
Voltage: 5.7V
Current: 3.5A/phase
Resistance: 1.9 Ohm/phase
Inductance: 22 mH/phase
Holding torque: 11.3N.m 1600oz-in
Rotor inertia: 3600g-cm2
Number of wire leads: 4
Weight: 5 kg
Length: 151mm
Note: Nema 34 Stepper Motor with 1600oz-in holding torque on single shaft, front shaft length is 37mm with 25mm flats length, the diameter for motor shaft is 14mm.
RED A+
GREEN A-
YELLOW B+
BLUE B-