Typical application: Power utility
Why PITE load units?
It is significant to check battery capacity in a regular basis. And the only reliable way to measure the battery capacity is to carry out a discharge test which is a must-to-do job to energize standby batteries and extend their life span.
PITE 3980 series DC load banks are featured by unique design and excellent performance that will facilitate your work for battery maintenance. It covers different types of batteries (2V, 6V and 12V). It has a wide range of discharging like 24V, 48V, 110V, 220V and 380V for different models. With optional DAC, discharging values of each cell could be viewed on the LCD display and computer simultaneously by using the PITE Data View software.
Features
• Small weight, portable unit with carrying case, convenient for onsite test
• Optional wireless DAC enables its PC monitoring both for discharging and charging
• It sets 4 conditions for auto shut-down of discharge, secured and time-saving
• Continued discharge available when previous discharge is stop abnormally
• Parallel connection of two units for mass discharge
• Real-time display of voltage for each cell with DAC
• Accurate data results and vivid waveforms
• Auto sorting for lag-out batteries during discharging
• AC & DC power supply modes for different needs
• Integrated functions for displaying, controlling and discharging
• Safe circuits avoids damage to battery when testing
• Direct USB drive for convenient data transfer to PC
• Powerful management software for data analyzing and report printing
• Dynamic discharge and static discharge data auto-saving
• Thermal cut-off and automatic overload protection
Technical Parameters
*1). PITE also offer specified load banks for testing 1.2V batteries. For details,
please contact our sales representatives.
*2). Discharge current could be higher with parallel connection of extra unit.
*3). In some countries, 110V is replaced by 120V with discharge range from 108V-143V.
Optional Data Acquisition Case (DAC)
DAC is optional for wireless communication with PITE 3980 main unit and PC. One DAC could be connected 12 cells of 2V or 4 cells of 12V (or 6V). With DAC, PITE 3980 and PITE DataView software will be able to monitor and record voltage of each cell. Without DAC, overall voltage will be recorded instead of voltage for each cell.
LB-1110 will need 5 DACs for wireless online monitor.
Why PITE load units?
It is significant to check battery capacity in a regular basis. And the only reliable way to measure the battery capacity is to carry out a discharge test which is a must-to-do job to energize standby batteries and extend their life span.
PITE 3980 series DC load banks are featured by unique design and excellent performance that will facilitate your work for battery maintenance. It covers different types of batteries (2V, 6V and 12V). It has a wide range of discharging like 24V, 48V, 110V, 220V and 380V for different models. With optional DAC, discharging values of each cell could be viewed on the LCD display and computer simultaneously by using the PITE Data View software.
Features
• Small weight, portable unit with carrying case, convenient for onsite test
• Optional wireless DAC enables its PC monitoring both for discharging and charging
• It sets 4 conditions for auto shut-down of discharge, secured and time-saving
• Continued discharge available when previous discharge is stop abnormally
• Parallel connection of two units for mass discharge
• Real-time display of voltage for each cell with DAC
• Accurate data results and vivid waveforms
• Auto sorting for lag-out batteries during discharging
• AC & DC power supply modes for different needs
• Integrated functions for displaying, controlling and discharging
• Safe circuits avoids damage to battery when testing
• Direct USB drive for convenient data transfer to PC
• Powerful management software for data analyzing and report printing
• Dynamic discharge and static discharge data auto-saving
• Thermal cut-off and automatic overload protection
Technical Parameters
|
Mains Voltage
|
1). AC 220V/110V, 50/60Hz;
2). DC (from batteries) |
|
For battery type
|
2V, 6V and 12V*
|
|
Discharging Current
|
Accuracy: 1% Resolution: 0.1A or 0.5%
|
|
Max discharge current
|
100Amp*
|
|
Max power
|
12.6kW
|
|
Discharge voltage range
|
10V-126.5V
|
|
Voltage Accuracy
|
0.5%
|
|
Sampling Interval
|
5s --1min
|
|
LCD Display
|
128*64 pixel
|
|
Temperature
|
0℃～40℃
|
|
Humidity
|
5%～90% Relative humidity
|
|
Safety standard
|
CE market, EMC standard
|
|
Dimension & Weight
(main unit)* |
553*225*425mm, 19kg
|
*1). PITE also offer specified load banks for testing 1.2V batteries. For details,
please contact our sales representatives.
*2). Discharge current could be higher with parallel connection of extra unit.
*3). In some countries, 110V is replaced by 120V with discharge range from 108V-143V.
Optional Data Acquisition Case (DAC)
DAC is optional for wireless communication with PITE 3980 main unit and PC. One DAC could be connected 12 cells of 2V or 4 cells of 12V (or 6V). With DAC, PITE 3980 and PITE DataView software will be able to monitor and record voltage of each cell. Without DAC, overall voltage will be recorded instead of voltage for each cell.
LB-1110 will need 5 DACs for wireless online monitor.