Ingredient: Fluorine carbon compound, weak cation.

Scope of Application: used for the waterproof and oil resistant finish of Synthon, cellulose fiber and blend fabric

Characteristics: ivory dispersion emulsion

              Proportion is 1.03g/ cm3 in the 20℃

PH is about 4.5

Can dissolve in the different proportions of water

Best used in the soft water

Low sensitivity for the residue of textiles (such as net lotion, dyeing assistants and alkali)

Need not high curing temperature

Have excellent performance of continue processing

Have good performance of processing stability

Reach the best effect of waterproof on textile with a little dosage.

Washable

Application:

Before adding the WOR, you need to adjust the PH of working solution as follows:

Add acetic acid 91-1.5g/L in the working solution. Generally speaking, the resistant to shear force of perfluorochemicals are limited, so control the flowing of liquid as soon as possible. If stir fast, the emulsion will be damaged but some yellow bubble. The bubble on the surface of emulsion should be cleaned, and the textile must be pretreatment without surface activity residue, or the residue such as fiber oil agent, sizing agent, surface activity residue and dyeing assistants that maybe affect the effect. And the textile will be also affected by finishing agent that contain silicon or softening agent. So we recommend: cleaning with the 2g/L AT100B firstly, and then neutralize with 1mg/L acetic acid (60%).

Usage:

WOR can be used by dip-padding method, bubble method and spray method. The dosage base on the requirement of fiber and effect is 10-40g/L.

Recommend technology process as follows:

Polyester-cotton fabric

30-60g/L WOR                 Drying: 110-130℃

Mangle expression: 60-80%       Curing: 160℃, 1min

Storage: