Main usage:
A V-type mixing machine series product is the highly effective asymmetric V-shaped mixer. It is used for powder or granule material mixed in the industry of chemical, food, pharmaceutical, feed, ceramics, and metallurgy, and so on. V-type mixing machine is one of the basic equipment in the enterprise.
It is the ideal equipment widely used in pharmaceutical and chemical industry on dry powder materials.
Characteristic:
The structure is reasonable and simply, with a closed operating condition, it is convenient to access the materials. Cylinder is made by stainless steel, it is easy cleaning. It is with advantage at good mixing effect, high efficient, small power consumption, and easy using..
Feeding can be manual or equipped with a vacuum suction device; with discharge butterfly valve device, mixing tube with asymmetric Flashlight, the cylinder is made by 1Cr18Ni9Ti materials, the inside part is smooth, so it is easy to clean.
V-type mixer column frame is made by steel structure, for turbo gear reducer and gears to slow down are used the carbon structure, so it could be achieved the design requirements of the machine operating. The distribution case is equipped with the timing device, according to the requirements of the material to set the operating time.
Principle and structure:
At one end of the machine equipped with a motor and gear reducer, for the motor power is passed through the belt to the speed reducer and then the reducer is passed through the coupling to the V-shaped barrel. So the V-shaped cylinder could be continuous operating and drive the material in the cylinder, upon, down, left and right mixed.
Use and maintenance:
1, Installation: placed in stable, installed the machine feet to level up, let the machine could be operated freely.
2 add oil before using, and then operate it without load. And then check if all fasteners are loose, if the voltage is normal, if the machine operating is smoothly. If there is the unusual situation, please adjust it.
3, turn the feeding port to the above, then open the feed cover to feed, feeding quantity can not be exceed the specified volume, and then close the feed cover, to switch on the machine for running, if there is unusual, it must be stopped to check.
4, finished work or the replace material, it must be washed inside and outside.
Technical data:
|
Model
|
RVH-5
|
RVH-10
|
RVH-14
|
RVH-50
|
|
Capacity(L)
|
5
|
8
|
14
|
50
|
|
Charge Weight (Kg/Time)
|
1.4
|
2.5
|
4
|
14
|
|
Cylinder Speed Rpm)
|
24
|
24
|
20
|
24
|
|
Power(W)
|
250
|
250
|
550
|
1100
|
|
Weight(Kg)
|
55
|
60
|
70
|
220
|
Production mixer technical data:
|
Model
|
RVH-100
|
RVH-200
|
RVH-300
|
RVH-500
|
RVH-1000
|
RVH-1500
|
RVH-2000
|
RVH-2500
|
RVH-3000
|
|
Full Capacity(L)
|
100
|
200
|
300
|
500
|
1000
|
1500
|
2000
|
2500
|
3000
|
|
Max.Capacity (L)
|
40
|
80
|
120
|
200
|
400
|
600
|
800
|
1000
|
1200
|
|
Length(Mm)
|
1900
|
2010
|
2220
|
2400
|
2800
|
3000
|
3200
|
3400
|
3600
|
|
Width(Mm)
|
800
|
850
|
900
|
950
|
1000
|
1100
|
1200
|
1300
|
1400
|
|
Centre Height(Mm)
|
800
|
850
|
900
|
950
|
1000
|
1100
|
1200
|
1300
|
1400
|
|
Inlet Diameter (Mm)
|
Φ250
|
Φ300
|
Φ300
|
Φ300
|
Φ400
|
Φ400
|
Φ400
|
Φ400
|
Φ400
|
|
Outlet Diameter (Mm)
|
Φ80
|
Φ100
|
Φ100
|
Φ150
|
Φ150
|
Φ200
|
Φ200
|
Φ200
|
Φ200
|
|
Outlet Height (Mm)
|
650
|
750
|
750
|
750
|
750
|
750
|
750
|
750
|
750
|
|
Turn Height(Mm)
|
1730
|
2230
|
2290
|
2370
|
2880
|
2850
|
3350
|
3800
|
3850
|
|
Turn Diameter(Mm)
|
1080
|
1480
|
1540
|
1620
|
2130
|
2100
|
2500
|
2880
|
3000
|
|
Cylinder Speed(R/Min)
|
15
|
15
|
15
|
15
|
12
|
10
|
10
|
8
|
6
|
|
Motor Power(Kw)
|
1.1
|
1.5
|
1.5
|
1.5
|
3
|
4
|
5.5
|
7.5
|
7.5
|
|
Weight(Kg)
|
180
|
250
|
350
|
550
|
1000
|
1100
|
1500
|
1700
|
1800
|
|
Pump Model needs
|
W2
|
W2
|
W2
|
W2or SK-1.5
|
W3 or SK-3
|
W3 or SK-3
|
W3 or SK-3
|
W3or SK-6
|
W3or SK-9
|