LED constant current power repeater is specially designed for our single color and RGB controllers to expand power output, it accepts PWM signal, double or three times more power can be reached by every one more power repeater, and in theory power repeater can be added unlimitedly. Also, the power repeater of constant voltage model and constant current model could be connected freely, suitable for synchronized controlling on different LED lamps.

1.             Total 3 channels, 350mA/700mA/1050mA per channel;

2.             Wide voltage from DC12V-48V, can drive 1～12pcs 1W/3W/5W hi-power LEDs;

3.             Accepts PWM signal;

4.      Unlimited quantities of power repeaters can be connected together to run unlimited quantities of LED’s;

5.             Maximum length from controller to repeater can be 500meters;

Please don’t install this controller in lightening, intense magnetic and high-voltage fields.

1.     To reduce the risk of component damage and fire caused by short circuit, make sure correct connection

2.     Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temperature.

3.     Check if the voltage and power adapter suit the controller
(please select DC12-48V power supply with constant voltage)

4.     Don’t connect cables with power on; make sure a correct connection and no short circuit checked with instrument before power on.

5.     Please don’t open controller cover and operate if problems occur.

The manual is only suitable for this model; any update is subject to change without prior notice.