Bincolor DMX Decoder series dedicate to output decoded DMX512 signal. It adopted the advanced micro-electronic control technology to convert the international standard DMX512/1990 signal into LED lamp driving signal, the output channels can be expanded by adding decoders, with 256-level brightness control per channel. Therefore, most of LED lights can be controlled via the signal convertion
BC-803 CV DMX Decoder is suit for constant voltage LED lamps.
|
Model
|
BC-803
|
|
Input voltage
|
DC12V～DC24V
|
|
Max load current
|
5A/CH×3
|
|
Max output power
|
220W(12V)/450W(24V)
|
|
Grey Scale
|
256 levels
|
|
Input signal
|
DMX512/1990
|
|
Output signal
|
3 channels constant voltage PWM
|
|
Decoder channels
|
3Ch or 4Ch (4th CH is shutter strobe)
|
|
DMX512 socket:
|
StandardXLR-3R
|
|
Product Dimension
|
L125×W52×H40(mm)
|
|
Weight (G.W)
|
300g
|
Features;
1. Input standard DMX512 protocol, Address can be set by DIP.
2. Automatically adapt input voltage DC12V-24V.
3. 3 output channels, 256 scale each, RGB driving control.
4. 10 modes of self-Changing, 8 level of speed changing.
5. Max output 5A each channel.
Two different versions
3 DMX ADD Version:
The 1st address controls LEDs on CH1,0-255 steps of brightness.
The 2nd address controls LEDs on CH2,0-255 steps of brightness.
The 3rd address controls LEDs on CH3,0-255 steps of brightness.
4 DMX ADD Version:
The 1st address controls LEDs on CH1, 0-255 steps of brightness.
The 2nd address controls LEDs on CH2, 0-255 steps of brightness.
The 3rd address controls LEDs on CH3, 0-255 steps of brightness.
0-127 of the 4th address controls the brightness, 128-255 for strobing
Safety warnings:
Please don’t install this controller in lightening, intense magnetic and high-voltage fields.
1. To reduce the risk of component damage and fire caused by short circuit, make sure correct connection
2. Always be sure to mount this unit in an area that will allow proper ventilation to ensure a fitting temperature.
3. Check if the voltage and power adapter suit the controller (please select DC12-24V power supply with constant voltage)
4. Don’t connect cables with power on; make sure a correct connection and no short circuit checked with instrument before power on.
5. Please don’t open controller cover and operate if problems occur.
The manual is only suitable for this model; any update is subject to change without prior notice.