With the help of our highly expirienced, creative and innovative design engineers, we can design any application.
Fast and advanced design systems enable us to provide fast turn-around times, maximum densities, impedance matching, multi-layer boards and other id);mei=Rcritical requirements.
Our laboratory advanced capabilities , minimum mechanical hole of 0.2mm and minimum line width/space of 3mil (0.075mm). Manufactured PCB are passing E-test or Flying Probe tests.
As an output we provide to the customer Protel project, BOM Bill Of Materials, schematics and Gerber files.
Our laboratory also provide PCB design (reproduction) service using advanced chemical-mechanical polishing technologies. The quote depends on layers and footprints quantity. As an output we provide to the customer Protel PCB and Gerber files. We can extract electrical schematic, if the
SERIAL ITEM TECHNICAL DATA
1 Layers 2-20 Layers
2 Max board size 450x660mm (18"x26")
3 Min Board Thickness
4 layers 0.38mm 15mil 6 layers 0.55mm 22mil 8 layers 0.80mm 32mil 10 layers 1.00mm 40mil 4 Copper Clad(Max.) 12oz(outer)/4oz(inner)
5 Min line Width/space 0.075mm 3mil
6 Min hole size 0.20mm 8mil
7 PTH wall thickness 0.025mm 1mil
8 PTH hole dia. tolerance ±0.075mm 3mil
9 Non PTH hole dia. tolerance ±0.05mm 2mil
10 Hole position deviation ±0.05mm 2mil
11 Outline tolerance ±0.10mm 4mil
12 Min S/M Pitch 0.075mm 3mil
13 Twist and Bow ≤1.0%
14 Insulation Resistance ＞1012Ω Normal
15 Test Voltage 50~300V
16 Electric strength ＞1.3KV/mm
17 Current breakdown 10A
18 Peel strength 1.4N/mm
19 Soldermask abrasion ＞6H
20 Thermal stress 288℃ 20Sec
21 Flammability 94V-0
22 Impedance Control +/-10%(Differential)
23 Blind/Buried via √
24 Surface Finished ENIG,ImAg,ImSn,OSP,HASL
25 Materials Getek,Rogers,Aluminum Board, FR-4(Tg140°c,Tg170°c)
Fast and advanced design systems enable us to provide fast turn-around times, maximum densities, impedance matching, multi-layer boards and other id);mei=Rcritical requirements.
Our laboratory advanced capabilities , minimum mechanical hole of 0.2mm and minimum line width/space of 3mil (0.075mm). Manufactured PCB are passing E-test or Flying Probe tests.
As an output we provide to the customer Protel project, BOM Bill Of Materials, schematics and Gerber files.
Our laboratory also provide PCB design (reproduction) service using advanced chemical-mechanical polishing technologies. The quote depends on layers and footprints quantity. As an output we provide to the customer Protel PCB and Gerber files. We can extract electrical schematic, if the
SERIAL ITEM TECHNICAL DATA
1 Layers 2-20 Layers
2 Max board size 450x660mm (18"x26")
3 Min Board Thickness
4 layers 0.38mm 15mil 6 layers 0.55mm 22mil 8 layers 0.80mm 32mil 10 layers 1.00mm 40mil 4 Copper Clad(Max.) 12oz(outer)/4oz(inner)
5 Min line Width/space 0.075mm 3mil
6 Min hole size 0.20mm 8mil
7 PTH wall thickness 0.025mm 1mil
8 PTH hole dia. tolerance ±0.075mm 3mil
9 Non PTH hole dia. tolerance ±0.05mm 2mil
10 Hole position deviation ±0.05mm 2mil
11 Outline tolerance ±0.10mm 4mil
12 Min S/M Pitch 0.075mm 3mil
13 Twist and Bow ≤1.0%
14 Insulation Resistance ＞1012Ω Normal
15 Test Voltage 50~300V
16 Electric strength ＞1.3KV/mm
17 Current breakdown 10A
18 Peel strength 1.4N/mm
19 Soldermask abrasion ＞6H
20 Thermal stress 288℃ 20Sec
21 Flammability 94V-0
22 Impedance Control +/-10%(Differential)
23 Blind/Buried via √
24 Surface Finished ENIG,ImAg,ImSn,OSP,HASL
25 Materials Getek,Rogers,Aluminum Board, FR-4(Tg140°c,Tg170°c)
If you have any queries please feel free to contact us.