Product Introduction:
TranlonTM Fiberglass chopped strand mats, with double layers forming technical, are more uniform on the fiber distributed, the chemical performances are more closed on all the directions.
The typical end-use applications include various panels, Tank, boats, FRP roofing sheet, Auto roof, and bathroom equipment and cooling towers etc.
Specification:
|
Product Code
|
Roll Width (mm)
|
Glass type
|
Density (g/ s. q. M)
|
Applicable to resin |
Total Density (g/ s. q. M) |
|
T01-1-250
|
up to 2600
|
E-glass
|
250
|
UP; VE; EP
|
250
|
|
T01-1-300
|
up to 2600
|
E-glass
|
300
|
UP; VE; EP
|
300
|
|
T01-1-450
|
up to 2600
|
E-glass
|
450
|
UP; VE; EP
|
450
|
Packaging:
Fiberglass products is could be produced into different width, and each roll is wound onto a paper tube which has an inside diameter of 76mm to 100mm. Then put into a polyethylene bag, and then packed in a cardboard box or wrapped up with Kraft paper. According to customer requirements, this product could be shipped either with carton packaging only or with pallet packaging. In pallet packaging, the products could be vertically or horizontally put on the pallets and fastened with packing straps and shrink film.
Remark: The products can also be packaged according to customer requirements.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and rain-proof area. It is recommended that the temperature and humidity should be always maintained at 15℃? 35℃and between 35%? 65% respectively. Please keep the product in its original packaging before use, avoiding moisture.
Quantity:
20' GP Container: About 9500kgs
40' GP Container: About 20000kgs
40' HC Container: About 22500kgs
Delivery Detail: