Introduction
Automatic pick and place machine TP 210+ is a mini-type desk high speed pick n place machine. It is a cost and effective machine.TP210+ can mount 0603, 0805,1206 etc and SOP, SOIC (size under 15*15mm, PIN foot less than 24)
TP210+ equips 50 pcs of 8 feeders ( electric feeder 8mm, 12mm, 16mm,24mm can choose), Z axis can route freely. It can meet mounting require of various of angle component.
1. Component available for below 20mm SOP columnar diode, triode, SOT, SOP, IC chips and and 0603 component (except of 5m Aluminum electrolysis electric capacitor ) etc
2. Intelligent electrical feeder
3. Program and mounting technology for multi –panels
4. Off-line program function
5. Program control
6. Visional program
7. Powerful data import function, any formats of PCB file can be imported. a new program can be finished in 10 minutes
8. Stably pick and place SMD 0402
9. Security cover for protection of operator to dustproof
10. High precision linear guiderail
11. Configurate 5 kinds of nozzle, software reminds of "nozzle changing"
Main parts:
Step motor with an angle change functionTP210+ can mount 45°, 90°,180° angle component.
Dual Parallel square-type wide guiderail
Compared with balling guiderail, the guiderail has a small space to ensure precision accuracy.
Visional+ machinery position system
Camera nearby mounting head can magnifying ' + ' cursor to make Mark point position more accurate
No-contact flying centering system
Flying centering system can mount most of SMD components include: 0603, 0805,1206 etc and SOP, SOIC (size under 15*15mm, PIN foot less than 24)
Flexible reference point system(RPS):
In addition to standard Round reference point, square PCB pad and ring PCB pad with hole also can be identified as a reference point.
All-purpose automatic feeder
50 pcs at most of automatic feeder, 8mm, 12mm,16mm, 24mm, you can choose to install according to your component type and your required speed. it uses unique Air suspended pick and place head design which can transmission several kinds of large and small component.
Protel file of component data import
Software control, limitless data file can save in PC, you can call them at any time when you need, easy to operate.
Technical Parameter
|
Model
|
TP210+
|
TP220
|
|
Max PCB size
|
300x200mm
|
300x200mm
|
|
max moving range
|
380×350mm
|
380×350mm
|
|
max moving range of Z axes
|
10mm
|
10mm
|
| Typical pick&place speed |
Max speed: 3700CPH
Actual speed:2400-3500CPH
|
Max speed: 4000CPH
Actual speed:2600-3800CPH
|
|
max pick&place accuracy
|
±0.015mm
|
±0.015mm
|
|
repeat accuracy
|
±0.15mm
|
±0.15mm
|
|
Positioning
|
Machinery Position
|
Machinery Position
|
|
Component Available
|
Resistor , capacitor above 0603 and SOIC below 15mm
|
Resistor , capacitor above 0603 and SOIC below 15mm
|
|
Program way
|
Visional program/Software program input
|
Visional program/Software program input
|
|
Driving mode
|
use industrial Synchronous belt to drive
|
use industrial Synchronous belt to drive
|
|
Automatic Feeder
|
8mm,12mm,16mm feeder be choose
|
8mm,12mm,16mm feeder be choose
|
|
Feeder Num
|
Can set 50 pcs of 8mm GFTA-08S smart feeder, separately two sides | Can set 50 pcs of 8mm GFTA-08S smart feeder, separately two sides |
|
compressed air
|
80psi(0.5Mpa)
|
80psi(0.5Mpa)
|
|
Power supply
|
220V,50Hz
|
220V,50Hz
|
|
Weight
|
95kg
|
126kg
|
|
Dimension
|
810×750×850mm
|
810×750×850mm
|