Introduction:
1. Automatic allocate cutter(optional): first detect the copper board surface height, and automatically adjust the depth of the cutter.2. Plane detection(optional): firstly detect the copper board flatness, the software automatically adjust the amount of cutter according to the test result.
3. Automatic zero position: automatic move to set-zero from anywhere.
4. Position and asymmetry positioning technology: ensure the accurate and correct of the positioning.
5. Continue drilling after breakpoint: start engrave from any percent or to any percent.
6. Virtual process: display the actual process according to the set parameter.
7. Real-time display the process pate: show al process before processing, show the current position when processing.
8. Choose any region to engrave: choose any area for engrave
9. Combination of engrave/automatic choose the cutter: select two cutters, automatic assigned area. Choose a large cutter when it does not affect the accurate, it can milling our large area in higher speed.
10. Universal drilling: dig any holes using a fixed cutter, reduce the times of change the drill.
Parameter
|
Processing panel
|
double sides
|
|
Working area
|
25cm*30cm
|
|
Mini workable diameter
|
6mil
|
|
Mini workable linear
|
4mil
|
|
Resolution
|
0.04mil(1um)
|
|
Operate speed
|
4.8m/min
|
|
Spindle speed
|
0-60000r/min
|
|
Spindle power
|
95W
|
|
Linear guide
|
Imported linear guide rail line
|
|
Drive means
|
Imported ball screw drive
|
|
Drill hole diameter
|
0.4-3.175mm
|
|
Drill speed
|
100(hole/min)
|
|
Control means
|
ARM
|
|
Communication
|
RS-232/USB
|
|
Dimension
|
630mm*610mm*505mm
|
|
Weight
|
70kg
|
|
Power
|
200VA
|