[Summary]:
This equipment is used to tin on the surface of PCB and enhance welding, at the same time it can protect
PCB to not be etching.

[Process]:
After electroplating and solidifying copper, put the copper board into tinning machine, there are 2 purposes:
1. tin on the PCB and holes to finish plating PCB;2. enhance linking stably and welding effect after tinning.
Steps:
1 fix the board which has been electroplated and solidified, and then put it into tinning liquor, the pothook
links rod of cathode.
2 please adjust current according to size of board. The standard of current is : 2A/(dm)2, please calculate area of double side if it is double side board.
3 take board out after 15 minutes.
4 Please use liquor exit to let liquor out.
5 Speed timing can adjust sway speed which is new design to control speed.

Add: If the user had any special request, please arrange with us.

[Technology parameters]:
1, voltage range: DC0～8V
2, current range: DC0～10A
3, electroplating time: 10-15 minutes. The time can be set according to your detail request.
4, max capacity: 490mm×290mm×350mm
6, max power: 350W
7, dimension: 620mm×310mm×490mm
8, weight: 45kg