F Series Helical Gear Motor
The details of our Gear Motor on the following:
Easily with various types of motor or adopt other power input.
The details of our Gear Motor on the following:
Easily with various types of motor or adopt other power input.
The same type of power can be used for the motor.
Easy to realize the combination of connection between model.
The driving ratio: divided fine, scope. Combination model can greatly transmission ratio, namely the output very low speed.
Installation forms: installation position is not restricted.
High strength, small volume: the high strength cast iron. Gear, gear shaft with gas carburizing quenching fine grinding process, thus unit volume high bearing capacity.
Long service life: in the correct selection (including the selection of proper use coefficient) and maintain normal use, under the condition of speed reducer (except the vulnerable parts) of main components of generally not be less than 20000 hours of service life. Wearing parts including lubricating oil, oil seal and bearing.
Low noise: reducer main components are machined, and through the assembly and test, and deceleration machine noise is low.
High efficiency: single type of no less than 95% efficiency.
May withstand the big radial direction load.
Can inherit not greater than 15% radial force of the axial load.
Model :
WF37 WF47 WF57 WF67 WF77
WF87 WF97 WF107 WF127 WF157
Main Technical Features:
Output Speed (r/min) 0.1-752
Output Torque (N. M) 18000 highest
Motor Power (K w) 0.12-200