FRP Tanks: 14" to 63" Diameter
Ying Han's water softeners treat the water by removing hardness using resin. The resin replaces the hardness in the water with salt which is regenerated periodically. The softened water can then pass through an RO system to remove the salt without the risk of scaling.
Softeners can be used in a variety of services including: industrial, municipal, and institutional applications. www. xayinghan. com xayinghan at yahoo.com.cn
Available Options
Duplex, triplex or multi units
Skid mounted, plumbed, wired systems
PLC control system
Alternate water meter types
Brine pump systems
PVC or CPVC face piping
Steel resin tanks
ASME coded tanks
Butterfly control valves
Inline hardness monitor
Unistrut channel supports
Steel Tanks: 24" to 84" Diameter
Ying Han's water softeners treat the water by removing hardness using resin. The resin replaces the hardness in the water with salt which is regenerated periodically. The softened water can then pass through an RO system to remove the salt without the risk of scaling.
Softeners can be used in a variety of services including: industrial, municipal, and institutional applications.
Standard Features
This series softeners are designed as fully automatic units either with timer or meter control. The timer control initiates softener regeneration at any predetermined time - on any or every day. The metered models start regeneration based on the total cubic meter
used.
The automatic regeneration controller features a choice of 7 or 12 day calendar wheels. Time of regeneration and length of time for each regeneration cycle are fully adjustable.
The steel tank is engineered for a 100 psi working pressure and is tested to 150 psi. It is equipped with a manhole in the upper dome.
The interior of the tank is coated with epoxy for protection against rust and corrosion. The exterior has a rust inhibiting primer coat.
A premium grade sulfanated nonphenolic polystyrene type resin is contained in the tank.
The resin will deliver 30,000 grains per cubic foot when brined at a rate of 15 lbs. per cubic foot.
The brine tank is a combination of high density polystyrene brine measuring tank and a brine valve, including an air eliminator valve and a safety brine refill shut off to prevent tank overflow.
The under drain utilizes either a hub & lateral or a header & lateral system to evenly distribute water and prevent resin loss, and to insure minimal pressure drop at peak flow rates.