1.Introduction of Jaw crusher

Jaw crusher series are based on years' experience and technology development.The continuous improvement and refinement have made them the preferred jaw crusher for professionals and our customers.This kind of crusher can meet all most crushing requirements and standards in primary and secondray crushing process,and the largest compression resistance of the material is up to 320MPa.This seriess are widely used in stone mining,metallurgical,construction,smelting,hydraulic and chemical industries,etc.

Jaw crusher has the features of high crushing and even product size ratio. It can be used to crush material.PE Series is used in primary crushing, while PEX series is used in secondary crushing and fine crushing.

Sanyyo jaw cruhser is widely used in grinding bartle,metallurgy,building matrials,high road,raiway,water conservancy and so on

 

2.Working principle of jaw crusher

The motor transmits power through belt,drives the moving jaw to do periodic motion towards the fixed jaw by the eccentric shaft.The angle between toggle plate and moving jaw plate increases when moving jaw moves.So the moving jaw moves towards the fixed jaw.The stuff will be crushed in this process.The angle between toggle plate and moving jaw decreases when moving jaw moves down,the moving jaw moves leaves fixed jaw by pulling rod and spring,the final crushed stuff will be discharged from the outlet.

firstly the machine’s leather belt and wheel are driven by the electric motor, then the movable jaw begins to move up and down by the eccentric shaft, when the movable jaw move from top to bottom, the angle between fixed jaw and movable jaw becomes smaller, the materials are crushed into pieces to reach the crushing target. When the movable jaw moves from bottom to top, the angle between fixed jaw and movable jaw becomes bigger, the movable jaw plate deviates from the fixed jaw plate under the function of drag rod and spring, at this moment, the crushed materials are discharged from the bottom outlet of the crushing cavity.

  

 3.Specification of jaw crusher

Model	Max. Feeding Size (mm)	Discharge Size (mm)	Capacity (t/h)	Motor Power (kW)	Overall Dimensions (mm)	Weight (t)
PE150×250	125	10-40	1-3	5.5	896×745×935	0.8
PE250×400	200	20-60	5-20	15	1150×1275×1240	2.8
PE400×600	350	40-100	15-60	30	1700×1732×1653	6.5
PE500×750	425	50-100	50-100	55	2035×1921×2000	10.3
PE600×900	480	65-160	60-130	75	2290×2206×2370	16.5
PE750×1060	630	80-140	80-180	110	2620×2302×3110	29
PE900×1200	750	95-165	140-260	110	3789×2826×3025	54.5
PE1000×1200	850	195-265	315-550	110	3335×3182×3025	57
PE1200×1500	1000	150-300	400-800	160	4200×3750×3820	100.9
PEX250×750	210	25-60	10-40	22	1667×1545×1020	5
PEX250×1000	210	25-60	15-50	30	1550×1964×1380	6.5
PEX250×1200	210	25-60	20-60	37	1560×2104×1415	7.7