Product Main

Specifications

Vsi Sand Making Machine by Zhongke
VSI new sand making machine absorbed the advanced techniques and also on behalf of the international level.
VSI Sand Making Machine is a newly researched equipment, with international advanced level.

VSI High Efficiency sand making machine(VSI crusher) is the top preferred equipment in artificial sand making and stone reshaping industry.

VSI sand making machine is specially suitable for making qualified stone and sand for highway,high-speed railway,high  buliding,hydropower dam construction,concrete mixing station.

VSI Sand Making Machine Characteristics:

1. Advanced double-pump oil lubrication system guarante shaft bearing lower temperature increase, longer life time, more reliable operation.

2. Main shaft is equipped with imported precision rolling bearing. It makes main shaft work stable, lengthen maintenance cycle, increase productivity.

3. Hydraulic lifting mechanism of upper cover can move away the cover easily, which saves man power during maintenance.

4. Over-vibration device is equipped. There will be alarm when vibration surpasses a stipulated figure. It will stop the machine, in order to protect it.

5. Special dust-proof design for main shaft bearing fully avoid dust entering bearing lubrication part, which make sure the machine work normally.

6. Special feed opening structure make it possible that center feeding and ring feeding comes together, in order to meet requriement of different stones. In addition, this equipment can not only crush stone, but also iron.

7. Shape of material-throughing device is better designed, which improve the utilization ratio.

VSI Sand Making Machine Usage:

VSI Sand Making Machine is widely used for artificial sand, in metal and non-metal ores, cement, refractory material, bauxite, silicon carbide, glass material, building material.

VSI Sand Making Machine Working Principle:

(1) Center Feeding:
Raw material falls down into feed hopper, then enter into impellor through central entrance hole. It is accelarated in high-speed impellor, then is thrown out at speed of 60-75m/s. When it hits impact plate, it is crushed. Final products come downwards though outlet.

(2) Ring Feeding:
Raw material falls down into feed hopper, then through ring, it is divided into two divisions by material-deviding plate. One enters into impellor through the center of material-deviding plate. The other falls down from outside of material-deviding plate. Material, which is thrown out by impellor at speed of 60-75m/s, hits material coming down from outside of material-deviding plate. In this way, material is crushed.

 

Specifications of Sand Making Machine
Items
Model
Max Feeder Opening (mm) Motor
Power (KW)
Impeller
Speed (r/min)
Quantities
(t/h)
Overall Dimensions (mm) Weight
(T)
PCL-600 30 20-35 2000-2470 20-35 2500×1600×2260 5.6
PCL-750 35 74-110 1500-2045 35-55 2780×1800×2700 7.3
PCL-900 40 110-180 1200-1685 55-100 3900×2160×2770 12.1
PCL-1050 45 180-264 1000-1430 90-160 4660×2450×3660 16.9
PCL-1250 45 264-370 850-1300 160-230 5600×2950×4000 22
PCL-1350 50 320-440 800-1185 200-260 5340×2940×3650 26