Application of sand maker

1.Tertiary and Quaternary Crushing

2.Mining

3.Metallurgy

4.Construction

5.Glass

6.Cement

7.Artificial sand

 

Features of sand maker

1.Smooth operation, low working noise, high efficiency and low consumption

2. Cubic shaped finished products, high stack density

3. Can be used in both dry and wet.

4. According with the dead hard and special hard materials

 

Discription of sand maker

Known as sand making machine is applied widely for the powder process of mineral product, plays an irreplaceable role in the equipments of pieces crushing. The finished product is in cubic shape, with lower content of needle-like particles, especially suitable for plastic of stone material and for production of sand with high ratio.

 

Working principle of sand maker

1. Center Feeding:

Raw material falls down into feed hopper, then enter into impellor through central entrance hole. It is accelerated in high-speed impellor, When it hits impact plate, it is crushed. Final products come downwards though outlet.

2. Ring Feeding:

Raw material falls down into feed hopper, then through ring, it is divided into two divisions by material-dividing plate. One enters into impellor through the center of material-dividing plate. The other falls down from outside of material-dividing plate. Material, which is thrown out by impellor ,hits material coming down from outside of material-dividing plate. In this way, material is crushed.

 

Technical Parameters of sand maker