Infrared Welder/Inverter Welder/Ultrasonic Plastic Welder

Infrared welding is a relatively new welding technique used for the many challenging materials and large part 
assembly with high strength and hermetic requirements.

During the Infrared welding, both part halves are held rigidly in position near an infrared emitting platen to melt 
the joining surfaces. The platen is removed and the part halves driven together and allowed to re-solidify under 
pressure.

It's very similar as the hot plate welder,but the difference is infrared welder use non-connect heat manner,the 
welding surface will be better than hot plate.

Vertical or horizontal platen configurations are available. From manually loaded and unloaded machines to semi and 
fully automated in-line systems, KEBER offers the widest array of standard products designed to accommodate a most 
product sizes.

 

Infrared Weld Strength:
As with the hot plate welding process, infrared welding produces a welded joint which, in many cases, yields a weld strength that is consistently equal to or stronger than any other area of the part. As a result, the weld area can most often be exposed to the same strains and stresses as any other area of the part.

Common Infrared Welded Materials:
Acrylonitrile Butadiene Styrene (ABS-Cycolac)
PolyOxy-Methylene (POM-Acetal & Delrin)
PolyAmide (PA-Nylon & Zytel)
PolyButylene Terephthalate (PBT-Valox & Enduran)
PolyEthylene (PE)
PolyEthylene Terephthalate (PET-Polyester)
PolyMethyl MethAcrylate (PMMA-Acrylic & Lucite)
PolyPhenylene Oxide (PPO-Noryl)
PolyPhenylene Sulfide (PPS-Ryton)
PolyPropylene (PP)
PolyStyrene (PS)
PolySulfone (PSO-Udel)
Thermo-Plastic Elastomers (TPE-Santoprene)