Product Main

Specifications

MD,MHL,MPL type bucket elevator
1.rapid centrifugal discharge
2.used for transporting non-abrasive and semi-abrasive materials
 
Introduction
Our company produce the MD-ring chain centrifuge bucket elevator, from the sports section (hopper with the traction chain), with the upper section of the drive sprocket, with a tight round the lower section, intermediate casing, the drive device, check brakes and other components. For upward transport of powder, granules small block of non-abrasive bulk cargo semi-abrasive materials, such as: coal, sand, coke wood, cement, water, minerals and so on.
The machine is characterized by rapid centrifugal discharge, and the use of rubber conveyor belt as the drive components, it is not suitable for large abrasive and transmission power take large pottery materials. The temperature of the material is transferred shall not exceed 60 °C, the use of a heat-resistant rubber band to allow 150 °C.
 
Specifications and parameters:
 
models
Traction form
Transmission capacit
Power
(kw)
Lifting height(m)
Deep doo
Light bucket
MD160
 
 
tape
8
3.1
2.2
4.82-30.3
MD250
21.6
11.8
3.0-7.5
4.48-30.08
MD350
42
25
5.5-11
4.3-30.3
MD450
69.5
48
7.5-11
4.54-29.5
MHL300
Ring with
centrifugal
28
16
5.5-11
4.66-30.32
MHL400
47.2
30
7.5-11
4.52-30.32
MPL250
 
Board chain
gravity
22.3-30
2.2-5.5
4.7-30.3
MPL350
50-59
3.0-11
4.0-30
MPL450
85-100
5.5-15
5.12-30.08