Specifications of Flotation Machine:
1. Large air - absorption capacity
2. Low energy consumption flotation machine
3. Easy operation and maintance
2. Low energy consumption flotation machine
3. Easy operation and maintance
Introduction of Flotation Machine
Flotation Machine applies to separation of non-ferrous metal, ferrous metal, noble metal, non-metallic mine, chemical material. And it can be used in roughing, scavenging, selection or reverse flotation. During the flotation process, pulp will be mixed with drug firstly and agitated. Then target ore grains will selectively attach to bubbles, float onto the surface of pulp, which will be scraped out and collected. And the rest materials will be left there. Thus, the result of separation is accomplished.
Working Principle of flotation machine
The impeller is rotated by V-belt of motor and produces centrifugal effect with negative pressure. Enough air is inhaled into mixed pulp, and pulp mixes with drug at the same time. Mineral sticks on bubble completely and floats on the surface of pulp to form mineralized bubble. Useful bubble is scraped out by adjusting flashboard height and controlling liquid surface.
The impeller is rotated by V-belt of motor and produces centrifugal effect with negative pressure. Enough air is inhaled into mixed pulp, and pulp mixes with drug at the same time. Mineral sticks on bubble completely and floats on the surface of pulp to form mineralized bubble. Useful bubble is scraped out by adjusting flashboard height and controlling liquid surface.
Features of flotation machine:
1. Large inhaling capacity and low energy consumption;
2. Complete flotation circuit with inhaling air and pulp, no auxiliaries are needed;
3. Process is easy to be changed;
4. Reasonable circulation of pulp decreases coarse sand sedimentation;
5. Automatic controlling device makes adjustment more convenient.
1. Large inhaling capacity and low energy consumption;
2. Complete flotation circuit with inhaling air and pulp, no auxiliaries are needed;
3. Process is easy to be changed;
4. Reasonable circulation of pulp decreases coarse sand sedimentation;
5. Automatic controlling device makes adjustment more convenient.
Technical Parameterof Mining Machine-Ore Flotation Machine:
| Type | Cubage(m3) | Diameter of impellor(mm) | Capacity(m3/min) | Speed of impellor(r/min) | Motor of impellor | Weight (t/single trough) |
| XJK-0.13 | 0.13 | 200 | 0.05-0.16 | 600 | Y90L-4-1.5 | 0.23 |
| XJK-0.23 | 0.23 | 250 | 0.12-0.28 | 500 | Y90L-4-1.5 | 0.35 |
| XJK-0.35 | 0.35 | 300 | 0.18-0.4 | 470 | Y90L-4-1.5 | 0.43 |
| XJK-0.62 | 0.62 | 350 | 0.3-0.9 | 400 | Y100L-4-3 | 0.86 |
| XJK-1.1 | 1.1 | 500 | 0.6-1.6 | 330 | Y100M-4-5.5 | 1.38 |
| XJK-2.8 | 2.8 | 600 | 1.5-3.5 | 280 | Y100M-4-11 | 2.33 |
| XJK-5.8 | 1.1 | 750 | 3-7 | 240 | Y100M-4-22 | 3.533 |