Cangbao 3 +3 RTV hi-temp gasket maker silicone sealant (red )
Features:
Cangbao 3+3 gasket maker sealant evaporates slow, and can resist the erosion of
the oil, sewage,antifreeze and the automatic gears oil , high temperature resistant
up to 343 ℃ (650 ° F), it will not shrink after curing, easy to remove when it needs
maintenance again .
Scope:
Applicable to a variety of heavy vehicles and cars, motorcycle engine, oil pan, gearbox,
axles, flanges, fittings, gearbox, exhaust pipes, carburetor, and every kinds of mechanical
cover, screws, water pipes, hoses and other joints and seals the tank.
Usage:
1,The sticking surface must be dry, clean and without dust, grease, wax and other impurities.
2, Cut the desired size of the nozzles, such as: 1 / 16 inch and 1 / 4 inch.
3,Coated the adhesive on the surface evenly (coated it into a continuous circle, the surrounding
of the screw hole is by the same treatment as well), in about 10 minutes ,it will gel on the surface,
and then load it back.
4,It will dry in 1 hour, and the completely dry firm is in 24 hours .
Note:
1.If accidentally contact with skin or eyes, flush immediately or wiped with a dry cloth, if still
feel bad, go and see the doctor.
2.When taking the operation should be kept the air circulating.
3.Do not swallow. Keep out of reach of children .
Product Specifications: 100g / support 16 / box 10 boxes / carton
Features:
Cangbao 3+3 gasket maker sealant evaporates slow, and can resist the erosion of
the oil, sewage,antifreeze and the automatic gears oil , high temperature resistant
up to 343 ℃ (650 ° F), it will not shrink after curing, easy to remove when it needs
maintenance again .
Scope:
Applicable to a variety of heavy vehicles and cars, motorcycle engine, oil pan, gearbox,
axles, flanges, fittings, gearbox, exhaust pipes, carburetor, and every kinds of mechanical
cover, screws, water pipes, hoses and other joints and seals the tank.
Usage:
1,The sticking surface must be dry, clean and without dust, grease, wax and other impurities.
2, Cut the desired size of the nozzles, such as: 1 / 16 inch and 1 / 4 inch.
3,Coated the adhesive on the surface evenly (coated it into a continuous circle, the surrounding
of the screw hole is by the same treatment as well), in about 10 minutes ,it will gel on the surface,
and then load it back.
4,It will dry in 1 hour, and the completely dry firm is in 24 hours .
Note:
1.If accidentally contact with skin or eyes, flush immediately or wiped with a dry cloth, if still
feel bad, go and see the doctor.
2.When taking the operation should be kept the air circulating.
3.Do not swallow. Keep out of reach of children .
Product Specifications: 100g / support 16 / box 10 boxes / carton