Hydraulic bearing puller ZYL-30
| ITEM NO | Output(T) | Spread(mm) | Reach(mm) | Ares Travel(mm) |
| ZYL-5 | 5 | 200 | 140 | 50 |
| ZYL-10 | 10 | 250 | 160 | 50 |
| ZYL-20 | 20 | 350 | 200 | 50 |
| ZYL-30 | 30 | 400 | 250 | 75 |
| ZYL-50 | 50 | 500 | 300 | 75 |
1.It's applied in car maintanence factory,machine shop and repair shop to pull the gear wheel,pulley bearing or other wheel out.
2.The claw is made of hammered steel and zinced.The steel drum is made of seamless pipe.Compact conformation,lightweight,small body,easy to carry.
1.Please adjust the claw to a right position which the wheel required.
2.Insert the handle into the lifting hole,then shake the handle to pull the wheel out.
3.After the wheel is pulled out,whirl the valve,then the cylinder rod will retract.
1.Please choose the right puller of outside diameter,draw measure and carrying according the pulled object.
3.If the cylinder rod kick,there may be some air in the cylinder,please shake the handle without clawing anything two or three times to exhaust the air.
4.Keep the puller clear to avoid oil silting or oil leaking.