Automatic Clay Brick Making Machine
1. Introduction of Clay Brick Making Machine
This machine is used to produce solid bricks and hollow bricks with great quantities of holes and large section in all size of hole style. It is applicable to many sorts of materials. Its features are novel structure, advanced technology, high extrusive pressure, high production and high vacuum degree. It adopts pneumatic clutch to control. It is sensitive, convenient and reliable. The following is the detailed information of the clay brick making machine.
Clay/Red Brick Making Machine, a type of patented product, is advanced by introducing the first-class technology of the same type of machine, which makes it popular both at home & abroad.
2. Application of Clay Brick Making Machine
The machine applies to clay, shale, coal gangue, fly ash, slag, mountain mud, silt, etc. As raw materials to carry out a strong mixing, vacuum processing, and then the screw auger extrusion system to produce provisions cross-section of ordinary solid bricks, hollow bricks, and other products.
3. Features of Clay Brick Making Machine
The trowel of this machine uses wear-resistant metallization technology; mixer shaft in above stage, main shaft of trowel and the body of machine are worked over by the aging, quenching and tempering; gears of reducer are hard tooth surfaces; clutch adopts screw press patented technology, which improves the service life of our equipments. At the same time, with reasonable design, compact structure, this machine can operate stably without having to install anchor bolt and greatly reduce the power consumption in the operating process due to shave. Utilizing the equipment and technologies can make the waste profitable as well as saving energy with obvious economic and social benefits.
4. Main Technical Parameters of Clay Brick Making Machine
|
Specification
Model
|
Mud diameter cylinder
(mm)
|
Spindle speed (r/min)
|
Power requirement
(kw)
|
Extrusion Pressure
(Mpa)
|
Capacity (ps/h)
|
|
300
|
300
|
50
|
18.5
|
0.5-1.5
|
10000-12000
|
5. Service Standards of Our company
Pre-sale:
(1) device model choice.
(2) According to customer' s special requirements, design and manufacture of products.
(3) training technical personnel for clients.
(4) the company free of charge to the user on-site engineering and technical personnel planning site for the user to design the best processes and programs.
Sale:
(1) product acceptance.
(2) to help customers develop construction programs.
After-sale:
(1) free to assign a dedicated service personnel, arrived at the scene and guide customers installation.
(2) equipment installation.
(3) on-site training of operators.
(4) complete sets of equipment installed, 1-2 full-time technical staff to stay free of charge to help customers on-site production of 1 month, until the user satisfaction.
(1) device model choice.
(2) According to customer' s special requirements, design and manufacture of products.
(3) training technical personnel for clients.
(4) the company free of charge to the user on-site engineering and technical personnel planning site for the user to design the best processes and programs.
Sale:
(1) product acceptance.
(2) to help customers develop construction programs.
After-sale:
(1) free to assign a dedicated service personnel, arrived at the scene and guide customers installation.
(2) equipment installation.
(3) on-site training of operators.
(4) complete sets of equipment installed, 1-2 full-time technical staff to stay free of charge to help customers on-site production of 1 month, until the user satisfaction.