Brick Making Machine
1.Qualified Brick Making Machine
2.Saves power,labor and space
3.Fully automatic
4.Large hydraulic pressure
5.ISO9001:2008
1.Qualified Brick Making Machine
2.Saves power,labor and space
3.Fully automatic
4.Large hydraulic pressure
5.ISO9001:2008
Best Brick Making Machine In Stock
1. Brief introduction of brick making machine:
The whole machine adopts PLC system, computer interface operation,it can achieve random signal analysis, fault diagnosis and parameter setting,which ensures the best working effect.
Material storage and separatory devices:adopting sealed conveyor to transport,strictly control the storable volume of the little hopper to achieve transportation for immediate use in order to prevent concrete from being fluidified earlier in the fluence of afershock which ensures the strenghth of the products.
2. Application of Brick making machine:
Mandatory material feeding devices:when the material arranging truck moves to the top of the mold box,the stirring fork begins to work quickly,which ensures even slant and identical products strenghth.
Increase the effective work-table,the application of the new vibration technologies makes this machine possesses larger work-table,Greatly enhance the productivity. The output of bricks improve 20 percent than domestic similar models.
3. Working principle of brick making machine:
Unique vibration forms: use computer control flow volume,pressure of the hydraulic system, Complete the vertical synchronous vibration,frequency changing,braking. then convert pressurized excess oil into vibration strike force, thereby reducing the energy consumption.
Reasonable distribution of vibration: The model case is locked on the vibration platform trough the fuel tank,the pressure head equipped with another special vibrator,achieving table-mold synchronous vibration to strengthen vibration effect, This kind of vibration can make the concretes rapid liquefaction,exhaust, make the products possess high-density, high strength.
4 Main technical parameters of brick making machine:
|
Molding blocks
|
Molding cycle
|
Theoretical
output
|
Motor
power
|
Total weight
|
overall
dimension
|
Pallet size
|
|
390×190×190
6 blocks/mold 11500blocks/shift:
|
About
15s
|
about69120 blocks/shift
(Standard brick)
|
34.5kw
|
9.8T
|
6790×2205×2780mm
|
850×780×40mm
|
|
240×115×90
18blocks/mold
34000 blocks/shift
|
||||||
|
240×115×53
36blocks/mold
69120 blocks/shift
|
Remarks: The local machine can use sand, stone, fly ash, cinder, gangue, slag tail, ceramsite, perlite and other industrial waste to make a variety of new wall material. Such as the hollow concrete blind hole brick, standard brick,etc, without being burned.

