Full Automatic Hydraulic Block Machine-Block Making Machine (JL6-15)
1.full automatic,hydraulic pressure
2.energy saving,high efficient,save manpower
1.full automatic,hydraulic pressure
2.energy saving,high efficient,save manpower
JL6-15 full automatic hydraulic block machine
Fully Automatic Block Making Machine Functions and features:
1, it used a large strong steel, super-strength design and special techniques and materials, rigid, and resistant to vibration, long life. Good stability and a fixed mold plate large box, with the replacement of various models of multi-purpose tool of a machine to meet the various needs.
1, it used a large strong steel, super-strength design and special techniques and materials, rigid, and resistant to vibration, long life. Good stability and a fixed mold plate large box, with the replacement of various models of multi-purpose tool of a machine to meet the various needs.
2, the host machine for hydraulic rotational molding, compression molding of vibration through the fuel tank will be parting vibration mode locking stage box to achieve high-density, high strength. Get very good results, molding cycle took 15 - 18 seconds to leave the floor after forming health, and spend a lot of floor investment.
3, hydraulic mainly sent to the respective board or backplane, feed, back feed, compression extrusion products, mechanical secondary, sending bricks and so on with each other to shorten the molding cycle.
4, forced feeding, the traditional approach it is difficult to feed materials evenly to join me die,
JL6-15 box-type machine equipped with a multi-fabric mixing fork, mold me to the top of mixing fork work on mandatory.
JL6-15 full automatic hydraulic block machine
main technical parameters
|
Parameter Name
|
Parameter values
|
|
|
The largest machine dimensions
|
6600×1990×3000L×W×H(mm)
|
|
|
Rated pressure of hydraulic system
|
21Mpa
|
|
|
Main vibration form
|
All vibration molded desk
|
|
|
Vibration frequency
|
50~70Hz
|
|
|
Vibration acceleration
|
10-15g
|
|
|
To adapt to the high brick
|
50-200mm
|
|
|
Pallet size
|
Wooden
|
830×660×40±1mm
|
|
Iron
|
830×660×8-10±1mm
|
|
|
Bamboo
|
830×660×15-20mm
|
|
|
Molding cycle
|
15-18 seconds 20-23 seconds to be added fabrics
|
|
|
When production
|
Standard block240×115×53mm
|
57,600 Pieces/ 8 hours
|
|
Feeder capacity
|
Effective storage volume of 0.45m3 hopper
|
|
|
|
Effective volume of 0.15m3 car charging
|
|
|
Machine power
|
36.8kw
|
|
|
Machine weight
|
12T
|
|
Finished products
|
Model
|
Block Specifications (Mm)
|
Forming a number of
(Block) |
Molding cycle
(Seconds) |
Middle class
(8 hours) (block) |
Host power
(KW) |
|
JL6-15
|
390×190×190(block)
|
6
|
15
|
11520
|
36.8
|
|
240×115×90(brick)
|
15
|
15
|
28800
|
||
|
240×115×53(standard brick)
|
30
|
15
|
57600
|
||
|
|
|||||