Torque energy-saving wire clamp
High voltage / low voltage bare overhead conductors
For the electrical system of non bearing type connection fittings -- for aluminum wire or steel core aluminum stranded wire connection, aluminium stranded wire and steel wire connection, as well as in non polluted area of the copper wire connection between.
It is a special moment nut long conducting wires and the wire clip of the constant contact pressure, and ensure that each clamp installation can achieve the best state and good electrical connection, and the clamp is installed, the influence of artificial factors.
·clip curved design, by the highly corrosion resistant aluminum alloy material, either a clip or screw has very good elastic effect, and the connected conducting wire together constitute a" breath" of the energy storage system. Greatly improve the clamp cross sectional capacity and service life, effectively reduces the energy loss. On the correct selection and use of circumstances, can withstand current capacity will surpass the connecting wire.
It is suitable for different diameter wire, copper connection, wide application range and the sign is clear, reduce the maximum specification selection. Screw, screw has special anti-corrosion treatment.
It is in the correct selection and use of circumstances, connection construction using a clamp.
·" breath" energy storage system, reduce the energy consumption and extend the line line service life.
·a large number of successful practice proves, torque energy-saving clamp -- make the connection be the pink of perfection.
Typical application
1 overhead line connection
2 and the cable systems
3transformer connection, to meet the demand of power supply
4 for equipment grounding
5substation cable connections
6level line (cable ) connection
7overhead ground wire rack guide falls" strand to strand"
Meet the standard
French & European standards (08-78): NFC66-800
NF EN 61284(05-00)
China standards: GB/T2317.3-2000, DL/T765.1-2001, GB9327-1988
Ministry of railway technical standards: TB/T2073-2003, TB/T2074-2003, GB/2314-1997
The Wuhan Institute of high voltage electric power industry electrical equipment quality test center detection
Report number: (2007) dynamic character twentieth
Through the Ministry of Railways product quality inspection center detection
Report number: (2009) JCW word no. W-106
Torque energy-saving wire clamp ( FCI ) selection parameter list
Product model line ( section mm ²) branch line ( section mm ²) bolt
PGA30210-9510-952
PGA50225-15025-1502
PGA60250-24050-2402
PGA60350-24050-3003
PGA80395-30090-3003
Note: the1is suitable for different diameter wire connection
2can be aluminum, copper, copper transition connection
3 in proper selection and use, to connect the construction of just use a wire clamp
4if used for wire insulation, optional insulation protection cover insulation protection